Cart 2 india

Specification
Brand : ChillWaves
BulletPoint1 : SIZE - 1" NPT Male x 3/4" NPT Male Reducer Hex Nipple. Note, NPT thread is the nominal pipe size and does not represent the actual diameter, please refer to the dimension drawing for specific diameter.
BulletPoint2 : MATERIAL - Made of high-quality brass, with strong wear and corrosion resistance, high compressive strength, durability, low magnetic permeability and high temperature ductility.
BulletPoint3 : Use - It is used to connect female threaded pipe fittings of the different diameter or to extend the length of pipes. It is a pipe fitting specially used for pipe connection engineering. It is suitable for most gases, water, oils and corrosive liquids.
BulletPoint4 : WORKING PRESSURE & TEMPERATURE - 1200PSI maximum working pressure, temperature range -65°F to +250°F (-53°C to +121°C)
BulletPoint5 : NOTICE - NPT is a tapered pipe thread with a 60° taper and generally cannot be screwed to the end, these brass fittings are low in lead but not suitable for drinking water.
Color : Galvanized
Color1 : Gold
Color2 : White
ConnectorType : Reducer
ExteriorFinish : Brass
ExternallyAssignedProductIdentifier1 : 804595291115
ExternallyAssignedProductIdentifier2 : 0804595291115
ExternallyAssignedProductIdentifier3 : 00804595291115
GpsrSafetyAttestation : 1
IncludedComponents : Steel nipple pipe
ItemName : ChillWaves Brass Pipe Fitting, Reducer Hex Nipple 1" NPT Male x 3/4" NPT Male Thread Adapter(3-PACK)
ItemPackageDimensions_Height : 13.208 centimeters
ItemPackageDimensions_Length : 3.7084 centimeters
ItemPackageDimensions_Width : 6.9088 centimeters
ItemPackageQuantity : 1
ItemShape : 45 degree elbow
ItemTypeKeyword : pipe-fittings
Manufacturer : ChillWaves
Material : Brass
ModelName : Supply Giant OQHM3400-10
ModelNumber : CWJX118D
NumberOfItems : 3
NumberOfPieces : 3
PartNumber : CWJX118D
ProductDescription : "

Pipe fittings are the components in the pipeline system that play the roles of connection, control, reversal, diversion, sealing, and support.

Note that the brass Reducer Nipple are US NPT standard threads with a 60 degree taper.

Product introduction：

1. It is used to connect internally threaded pipe fittings of the different diameter or to extend the length of pipes. NPT female and male threads are hard connected and do not require sealing in most cases.

2. It is suitable for most gases, water, oils and corrosive liquids. Widely used in grease, fuel, refrigeration, water, instrumentation, oil and gas and hydraulic systems.

3. The hex fittings are designed for easy tightening or loosening.

4. The threads are smooth and clear, easy to install, and a sufficient number of threads are designed to ensure that the joint is stronger after tightening and prevent loosening. To ensure a seal, Teflon tape can be used, just wrap a few turns around the threads.

5. When purchasing pipe fittings, consider the application as this will affect the material type, shape, size and desired durability. Fittings are threaded or unthreaded and come in many shapes, styles, sizes and schedules (wall thickness)

PACKAGE INCLUDED:

3 x 1" MNPT x 3/4" MNPT Reducer Hex Nipple

1 x Teflon tape

"
ProductSiteLaunchDate : 2023-05-08T11:32:10.238Z
Size : 1" NPT x 3/4" NPT
Style : PACK OF 3
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 2
UnspscCode : 40141700