Cart 2 india

Specification
Brand : EZ-FLO
BulletPoint1 : EZ-FLO WASTE ARM: Waste arm tubings are widely used in the under-sink installation for kitchens and bathroom sinks; feature a white finish that gives a modern, sleek look
BulletPoint10 : Permanent or temporary cap
BulletPoint11 : Underground or above-ground
BulletPoint12 : Low cost and reusable
BulletPoint13 : To install simply place over open end of pipe and tighten to 60 Ibs torque
BulletPoint2 : DURABLE: This plumbing arm is made with high-impact polypropylene that protects against corrosion and provides durability
BulletPoint3 : EASY INSTALLATION: This 1-1/2 inch x 15 inch pipe is equipped with a direct connection for a quick and easy installation
BulletPoint4 : QUALITY: This durable extension tube is designed for use in tubular drain applications for the best performance
BulletPoint5 : ASTM B75 Alloy C12200 Copper
BulletPoint6 : Underground or above-ground
BulletPoint7 : Low cost and reusable
BulletPoint8 : To install simply place over open end of pipe and tighten to 60 Ibs torque
BulletPoint9 : Fits 2-Inch cast iron, steel, copper or plastic piping
Color : White
Configuration : configuration
ConnectorType : Press Pex
CustomerPackageType : 1
Department : Unisex-Adult
ExteriorFinish : Copper
ExteriorFinish1 : Stainless Steel
ExteriorFinish2 : Alloy Steel
ExternallyAssignedProductIdentifier1 : 091712353904
ExternallyAssignedProductIdentifier2 : 0091712353904
ExternallyAssignedProductIdentifier3 : 00091712353904
FitType : fit_type
GpsrSafetyAttestation : 1
IncludedComponents : 1-1/2 Inch x 15 Inch Waste Arm
IncludedComponents1 : 1-1/2" slip joint adapter
IncludedComponents2 : Silicone seal
ItemDisplayWeight : 1 pounds
ItemForm : item_form
ItemName : EZ-FLO 1-1/2 Inch x 15 Inch Waste Arm with Direct Connection for Tubular Drain Applications, White Polypropylene, 35390
ItemPackageDimensions_Height : 39.37 centimeters
ItemPackageDimensions_Length : 4.572 centimeters
ItemPackageDimensions_Width : 5.842 centimeters
ItemPackageQuantity : 1
ItemShape : adapter
ItemTypeKeyword : pipe-fittings
Manufacturer : EZ-FLO
Material : Polypropylene
MaximumPressure : 30 pounds_per_square_inch
ModelName : 1-1/2 Inch x 15 Inch Waste Arm
ModelNumber : LD200058
NationalStockNumber : 4730-01-376-3138
NumberOfBoxes : 1
NumberOfItems : 1
NumberOfPieces : 5
NumberOfSets : 1
PackageLevel : unit
PartNumber : 35390
ProductDescription : Type:Compression Tube Fitting
Material:304 Stainless Steel
The compression fitting has the characteristics of reliable connection, strong pressure resistance, temperature resistance, sealing and repeatability, convenient installation and maintenance, and safe and reliable work.

Using the step
1.Cut the seamless steel tube with suitable length, the cut surface should be smooth and free of burrs
2.Put the nut and ferrule on the steel pipe in sequence, paying attention to the direction
3. Apply lubricating oil on ON the connector body and the ferrule, insert the steel pipe into the joint body to the end, and start to tighten the nut by hand

ProductSiteLaunchDate : 2012-05-14T16:01:20Z
SafetyWarning : Always follow the manufacturer's instructions for installation and usage. Push the tubing firmly over the barbs for a secure fit. If desired, heat the tubing in the sun before installation to soften it and make it more maneuverable. Regularly inspect the connections for leaks and tighten as needed to prevent water damage.
Scent : scent
Size : Pack of 1
SkipOffer : 1
Style : Direct Connection
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 30000000