Cart 2 india

Specification
Brand : Generic
BulletPoint1 : It is "CNC compatible" and can be connected to a CNC machine for automated cutting operations.
BulletPoint2 : It comes with standard CNC ports and necessary accessories for CNC integration
BulletPoint3 : With good performance in electricity conductivity and cutting efficiency.
BulletPoint4 : Standardized manufacture and fine workmanship guarantee the accuracy of machining to reach high compatibility with your device.
BulletPoint5 : Applicable for thermal dynamics SL60/100 plasma cutting torch.
Color : Black
ExternallyAssignedProductIdentifier : 9582728810754
ExternallyAssignedProductIdentifier1 : 0755824205673
ExternallyAssignedProductIdentifier2 : 755824205673
IncludedComponents : no
ItemName : Newlin Tech Handheld or CNC Dual Purpose Plasma Cutter CUT-120 with P80 26ft 180° Straight Machine Torch
ItemPackageDimensions_Height : 3 centimeters
ItemPackageDimensions_Length : 12 centimeters
ItemPackageDimensions_Width : 11 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : plasma-arc-cutting-equipment
Manufacturer : Newlin Tech
Material : Steel Iron
ModelName : CUT-120
ModelNumber : CUT-120
NumberOfItems : 1
PartNumber : Respicefinema5gzg0h6su
PowerSourceType : ac
ProductDescription : Plasma Cutter CUT-120


Model: CUT-120
Rated input voltage: 3-220/380V ±15%, 50/60Hz
Rated input capacity: 22.4 KVA
Rated output current: 120A
Current adjust range: 30-120A
Qualitycuttingthickness(Manual type for Carbon Steel): 1-25mm
Qualitycuttingthickness(Machine type for Carbon Steel): 1-13mm
Max.cuttingthickness(Carbon Steel): 42mm
Plasma gas: Compressed air
The working plasma gas pressure: 0.4～0.6MPa
Torch cooling mode: Air cooling
Arc striking mode：Non-contact

Package:
This Plasma Cutters can make handheld or CNC machine cutting,
1 set CUT-120 Plasma Cuter, 220V or 380V , 3 - Phase voltage
It will come with 8(26FT)m wire including straight machine torch, 10 sets nozzle & electrode
Ground clamp, oil-water separator, 4 pin and 2 pin viation plug，rubber hose, user manual

Environmental condition:
Please use the machine in a clear place without any of dust, corrosive gas and inflammables and explosives; Do not use it in open air and rain;
Required air relative humidity should ≤90％(at 20℃)，40℃≤50％(at 40℃)；
Environment temperature range should be at-10℃～40℃;
The coolant liquid can not be frozen when use;
Any metal materials can not be put on or insider the power source;
Keep the machine away from the wall of some other closure things at least 30cm, two machines distance at least 30cm.
Use it under altitude lower than 1000m.

Power supply condition:
1)Power supply：3～380/220V ±15%, 50/60Hz
2)Voltage fluctuation range ＜±10%；
3)Frequency fluctuation range＜±1%；
4)Unbalance rate of three phase voltage ＜±5%；
5)When use engine generator: the output power of the generator have to be 2 times higher than the rated power of the plasma power source, with compensating coil;

Panel and its functions:
1. Digital ammeter: Displaying pre-set cutting current when not cutting, displaying real cutting current when cutting;
2. Cutting current adjusting knob: Adjusting cutting current；
3. Gas control selection switch: When it’s on “Checking gas”, gas valve opens to test gas flow. When it’s on “Cutting”, the gas valve opens during cutting automatically;
4. Torch operation mode selection switch: When it turns on 2-Step, the torch switch should be pressed at the process of cutting, and the cutting stops after loosening the switch. When it turns on 4-Step, press the torch switch and loosen it, the cutting starts to work, and the stops after pressing the switchagain;
5. Cutting ground cable socket: Toconnect the cutting ground cable;
6. Torch striking terminal: Toconnect torch striking wire;
7. The control socket of cutting torch: to connect the control signal wire of the cuttingtorch;
8. Air & Power output terminal: the current output terminal is also the compressed air output terminal. It is gas pipe connector to connect water-cooled torch when the water-cooled torch is used, and it is connector to connect torch gas-cooled cable when air-cooled torch is used;
9. Power switch: Tocontrol the ON/OFF of 3-phase power supply of cutter;
10. Power input: it’s connecting box on CUT-120 to connect the phase power. The green/yellow wire is the ground lead, it should be connected with ground firmly;
11. Arc voltage output: CUT-120 is output socket (Pin 1 is “＋” and pin 2 is “－”) . The default arc voltage output is 1:1. If it is needed, please open the cutter top cover, and use two-core rubber wire to connect the wire terminal on printed board. Please connect the wire according to the requirements, and pay attention to the negative and positive electrode;
12. Control signal connector: To control automatic cutting equipment (there is starting signal and arc striking success signal);
13. Air pressure regulation filter：For adjusting the working pressure of compressed air and filtering the water in air；
14. Fuse holder of arc voltage signal;
15. Ground protection terminal.
ProductSiteLaunchDate : 2024-11-28T16:23:07.880Z
Size : 27.56x14.96x33.86"
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 27112700