Cart 2 india

Specification
Brand : ACCEPTIN
BulletPoint : 2pcs 220854 Retaining Cap Fit 45XP 65 85 105 HRTMRT
BulletPoint1 : Pilot Arc Plasma Cutter: The STC750P plasma cutter with pilot arc function, It’s a high-frequency non-contact arc starting method, This means the torch head doesn't need to make contact with the metal plate. With the addition of a PA (Pilot Arc) adjustable function, the maintenance time of the pilot arc is extended, reducing energy consumption during non-cutting periods and minimizing electrode wear, extend consumables life.
BulletPoint2 : Digital Screen Display: The central digital display shows parameters like air pressure, voltage, and current, enabling users to monitor the equipment's status in real-time and make adjustments as needed, enhancing operational efficiency. In the event of a malfunction, the screen displays an error code, facilitating quick troubleshooting.
BulletPoint3 : Air Sensor Technology: The air sensor built in machine displays the air pressure on the front panel of the machine. Users can adjust the air pressure manually through the air regulator (air pressure cannot be automatically adjusted). An air filter is installed at the back of the machine, equipped with a quick-connect 1/4 NPT air connector, ready for use right out of the box. Once connected to an air compressor, the recommended air pressure should be within 65 PSI, with a flow rate of 250 liters per minute
BulletPoint4 : Plasma Cutting Thickness: With advanced IGBT inverter technology, the 50/60 Hz high-frequency pilot arc plasma cutter supports dual voltage inputs of 110V and 220V, and operates at a 60% duty cycle. At 110V, the current range is 15-40A. while at 220V, it ranges from 15-75A. The recommended maximum cutting thickness is 12mm at 40A and 45 PSI on 110V, And 25mm at 75A and 70 PSI on 220V.
BulletPoint5 : PT/2T/4T/PA Function: The post-time function can be adjusted between 3-15 seconds, helping to cool the torch head and extend the life of consumables. A cooling time of 4-8 seconds is generally recommended. The 2T and 4T modes offer automated cutting control, relieving the user's hand. 2T is a semi-automatic cutting control, whereas 4T is fully automatic. The PA setting adjusts the duration of the pilot arc, with longer settings ideal for cutting mesh metal and shorter settings beneficial for extending the life of consumables.
Color : Orange
ExternallyAssignedProductIdentifier1 : 633411460233
ExternallyAssignedProductIdentifier2 : 0633411460233
IncludedComponents : Plasma Cutting Equipment
IncludedComponents1 : plasma cutter
IncludedComponents2 : plasma cutting machine
IncludedComponents3 : earth clamp with cable
IncludedComponents4 : fixed air regulator
ItemName : ACCEPTIN 2pcs 220854 Retaining Cap Fit 45XP 65 85 105 HRTMRT
ItemPackageDimensions_Height : 9.3 centimeters
ItemPackageDimensions_Length : 2.5 centimeters
ItemPackageDimensions_Width : 6.9 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : plasma-cutting-equipment
Manufacturer : ‎ACCEPTIN
Material : copper
Material1 : metal, electronic, plasma cutter
Material2 : plasma cutting torch
Material3 : plasma cutter
ModelName : 220854-2
ModelNumber : 220854-2
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : 220854-2
Pattern : Classicle tip 50A 24kit
PowerSourceType : hand_powered
ProductDescription : 2pcs 220854 Retaining Cap Fit 45XP 65 85 105 HRTMRT
ProductSiteLaunchDate : 2020-10-27T09:38:07.174Z
Size : .035 KIT
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 23270000
Voltage : 110220 volts