Cart 2 india

Specification
Brand : Tgoon
BulletPoint1 : ADJUST HEIGHT: can continuously adjust the height of the cutting torch on the uneven steel plate according to the set arc pressure value, so as to ensure that the height of the cutting torch to the steel plate remains constant
BulletPoint2 : IMPROVE EFFICIENCY: Automatic control of cutting distance enables you to obtain kerfs, reduce workpiece scrap, and improve cutting speed and efficiency
BulletPoint3 : MOTOR CONTROL: When is working in automatic or manual state, the switch on the panel can be operated to control the of the motor
BulletPoint4 : AUTOMATIC CONTROL: When switching to automatic mode and there is input arc voltage, the controller controls the cutting height according to the arc voltage setting value on the panel
BulletPoint5 : WITH FITTINGS: Equipped with screws, nuts, fittings, easy for you to install, complete accessories guarantees convenient
BulletPoint6 : Flame torch assembly being including.
BulletPoint7 : StarCAM nesting software with Softdog being including.
ExternallyAssignedProductIdentifier : 7907913812283
ExternallyAssignedProductIdentifier1 : 0711620476815
ExternallyAssignedProductIdentifier2 : 711620476815
IncludedComponents : StarCAM software
ItemName : Plasma Torch Height Controller, Improve Efficiency Reduce Workpiece Scrap Continuous Adjustment Arc Voltage Height Controller for Welding
ItemPackageDimensions_Height : 4.33 inches
ItemPackageDimensions_Length : 11.02 inches
ItemPackageDimensions_Width : 4.72 inches
ItemPackageQuantity : 1
ItemTypeKeyword : plasma-cutting-equipment
Manufacturer : Tgoon
Material : material
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : 020218 220016 176658 202808
ProductDescription : Feature:
1. ADJUST HEIGHT: can continuously adjust the height of the cutting torch on the uneven steel plate according to the set arc pressure value, so as to ensure that the height of the cutting torch to the steel plate remains constant
2. IMPROVE EFFICIENCY: Automatic control of cutting distance enables you to obtain kerfs, reduce workpiece scrap, and improve cutting speed and efficiency
3. MOTOR CONTROL: When is working in automatic or manual state, the switch on the panel can be operated to control the of the motor
4. AUTOMATIC CONTROL: When switching to automatic mode and there is input arc voltage, the controller controls the cutting height according to the arc voltage setting value on the panel
5. WITH FITTINGS: Equipped with screws, nuts, fittings, easy for you to install, complete accessories guarantees convenient operation


Specification:
Item Type: Torch Height Controller
Material: Aluminum alloy
Dimension:
Width: Approx. 225mm / 8.86in
Height: Approx. 80mm / 3.15in
Depth: Approx. 49mm / 1.93in
Input: DC 24V±10%, 2A
Lifting Motor: DC24V permanent magnet DC motor
Output: DC 24V Maximum 40W
Speed Control: Pulse Width Modulation (PWM) with electric drive voltage feedback
Arc Voltage Range: 30-250V
Arc Voltage Accuracy: 1V-5V, which can be adjusted by parameters
Initial Positioning:
1. Proximity switch initial positioning
2. initial positioning(need to support isolation positioning box)
Input Arc Voltage: 1: 1 or 50: 1 arc voltage value(built in isolation voltage divider)
Working Environment: -10℃~60℃
Host Weight: 0.8 kg / 1.8 lb(approx.)
Protection Class: IP64, from entering
Mounting Connector: 2 pin, 4 pin, 5 pin, DB




















ProductSiteLaunchDate : 2022-07-07T21:00:55.354Z
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredDgHzRegulation1 : not_applicable
SupplierDeclaredDgHzRegulation2 : not_applicable
SupplierDeclaredDgHzRegulation3 : not_applicable
SupplierDeclaredDgHzRegulation4 : not_applicable
SupplierDeclaredDgHzRegulation5 : not_applicable
UnspscCode : 23271800