Cart 2 india

Specification
Brand : Everlast Welders Canada
BulletPoint1 : Blowback start starts arc without the need of High Frequency which can interfere with surrounding electronics
BulletPoint10 : Blowback start starts arc without the need of High Frequency which can interfere with surrounding electronics
BulletPoint2 : Easy starting with Blow Back Pilot arc allows easy cutting of rusty and painted metals
BulletPoint3 : Adjustable postflow timer for maximum consumable life
BulletPoint4 : Suitable for use with 11,000 W "clean power" generators.
BulletPoint5 : IGBT modules from Infineon (Siemens) improve reliability and performance while reducing overall weight
BulletPoint6 : Comes with CNC torch (Hand torch not included)
BulletPoint7 : Over Current and Duty Cycle protection indicates fault with a dedicated warning/diagnostic light, and shuts down output until condition is resolved
BulletPoint8 : 3 Second pilot arc tip saver feature shuts down pilot arc after 3 seconds of contiuous operation if no cutting is present to prevent premature consumable wear
BulletPoint9 : Pilot arc improves performance and cutting on dirty, painted, or rusted metals
Color : Green
ExternallyAssignedProductIdentifier : 8154620276337
ExternallyAssignedProductIdentifier1 : 0856148008107
ExternallyAssignedProductIdentifier2 : 856148008107
GpsrSafetyAttestation : 1
IncludedComponents : CNC port, torch, IGBT modules, Over Current and Duty Cycle protection
ItemName : PowerPlasma 62i plasma cutter Inverter Type Cutting System 60amp with CNC Package
ItemPackageDimensions_Height : 11.9888 centimeters
ItemPackageDimensions_Length : 3.7084 centimeters
ItemPackageDimensions_Width : 10.795 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : plasma-cutting-equipment
Manufacturer : Everlast Power Equipment
Material : Metal
ModelName : 62i
ModelNumber : 18092024C
NumberOfBoxes : 1
NumberOfItems : 1
NumberOfPorts : 1
PartNumber : 60S
PowerSourceType : Electric Powered
ProductDescription : Finally, it is here. The proven PowerPlasma 62i is now available in a CNC only package. This unit comes with all the basics to get started with your Plasma table, including CNC port, and CNC torch. It has has the convenience, portability and performance that will meet the needs of everyone from the weekend enthusiast to the welding and fabrication shop operating a small plasma table. The PowerPlasma 62i is built on an inverter platform, making use of IGBT technology to reduce weight, and improve reliability and performance. The unit has plenty of cut capacity with a recommended 3/8" regular cuts, maximum clean cut capability is up to 3/4" (at reduced speeds). Pierce up to 5/16" for production cutting. The new iPT 60M CNC torch is part of the standard package and features a proven long life Italian design with blow back start, pilot arc and a variety of consumable choices. The PowerPlasma 62i features a 3 second tip saver to reduce premature consumable wear by limiting pilot arc on time, if no cutting is taking place.
ProductSiteLaunchDate : 2017-06-27T07:00:00.000Z
RecommendedUsesForProduct : Commercial
Size : One Size
SpecificationMet : ASME, ANSI, CSA, UL, CE
StartingWattage : 11000 watts
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 12
UnspscCode : 27112700
ValveType : Needle Valve
Wattage : 11000 watts