Cart 2 india

Specification
AutomotiveFitType : universal_fit
Brand : Nanolex
BulletPoint1 : Restores and protects faded trim
BulletPoint2 : Protects against weather, frost, salt and acid rain
BulletPoint3 : Penetrates trim surface quickly without leaving a greasy finish
BulletPoint4 : Protects for over 9,000 miles
BulletPoint5 : Developed, tested and manufactured in Germany
Color : Gloss Top Coat
CompatibleMaterial : Plastic
ContainsLiquidContents : 1
ExternallyAssignedProductIdentifier : 4262380393752
ExternallyAssignedProductIdentifier1 : 0796752108278
ExternallyAssignedProductIdentifier2 : 796752108278
IncludedComponents : 2*Car refurbishment agent + 2*sponge
Ingredients : plastic care concentrate
ItemDisplayVolume : 1 liters
ItemForm : Liquid
ItemName : Nanolex Trim Rejuvenator 200ml
ItemPackageDimensions_Height : 16.4084 centimeters
ItemPackageDimensions_Length : 5.588 centimeters
ItemPackageDimensions_Width : 12.5984 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : automotive-plastic-protectants
ItemVolume : 1 liters
LiquidContentsDescription : plastic care concentrate
LiquidVolume : 120 milliliters
Manufacturer : Nanolex
ModelName : Holyarm-012-3
ModelNumber : 4260343700272
NumberOfBoxes : 1
NumberOfItems : 7
PartNumber : 4260343701170
Pattern : Satin top Coat
ProductDescription : The special, deeply-penetrating ingredients of Nanolex Trim Rejuvenator ensure that the trim does not fade or become brittle. The typical effects of weathering and greying are also prevented. Nanolex Trim Rejuvantor cleanses gently and adds durability, plus it penetrates the surfaces easily and quickly without adding a greasy finish or leaving an artificial shine. With proper maintenance (LINK to maintenance instructions!) Nanolex Trim Rejuvenator will last approximately 15000 km on the surfaces it was applied to. (LINK to manual(S)) Nanolex Trim Rejuvantor was developed, tested and manufactured in Germany. Size: 200 ml and 1000 ml Directions How To Use Nanolex Trim Rejuvenator This product can be stored for up to 24 months (in a dry, temperature stable environment) Processing temperature: 5-30°C - Avoid direct sunlight and/or high air humidity. IMPORTANT: Before you use a Nanolex Car Care product please make sure you wear suitable protection gear – we always recommend to use Latex-or Nitril gloves to make sure your hands are protected from any possible damage to your skin. 1. Nanolex Trim Rejuvenator can be applied to all exterior plastic trim. The surface must be dry and free of contamination and dust. We recommend to use Nanolex EX to assure that all contamination is removed completely. 2. Nanolex Trim Rejuvenator should be applied very sparingly with a lint free tissue/applicator pad etc. to create an even but very thin layer of coating. The surface must be covered completely. After the application excess material should be removed by simply wiping it off with a lint free microfiber cloth, applying medium pressure. 3. Directly after polishing the sealant is dry and the surface can be touched. At normal ambient temperature the sealant is completely cured after approximately 2 minutes. Please read the separate information on how to clean your car after a treatment with Nanolex sealants.
ProductSiteLaunchDate : 2021-05-10T03:37:43.689Z
RecommendedUsesForProduct : For Paint Protection, Removes Scratches, Removes Dirt, Removes Oxidation
Scent : Vanilla
Size : 6.76 Ounces
SkipOffer : 1
SpecificUsesForProduct : Remove Scratch
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
SurfaceRecommendation : Automotive Exterior
UnitCount : 4.0577
UnspscCode : 47131800
WarrantyDescription : NO