Cart 2 india

Specification
Brand : Perko
BulletPoint : Great Product
BulletPoint1 : Diameter: 1-1/4"
BulletPoint2 : Color: Stainless steel
BulletPoint3 : Number: 734406Flush Pro valves offer one of the easiest to use flushing systems available for inboard engines. Simply unscrew the Flush Pro cap, connect a standard garden hose, turn on the water and start your engine. The Flush Pro valve automatically pulls fresh water into the boat's cooling system - even if the boat is in the water - flushing out the entire cooling system with fresh water. When done, shut off the engine, turn off & disconnect the hose and replace the Flush Pro cap
BulletPoint4 : Country Of Origin: Taiwan, Province Of China
Color : Stainless Steel
Department : unisex-adult
ExteriorFinish : Stainless Steel
ExternallyAssignedProductIdentifier1 : 0085226344886
ExternallyAssignedProductIdentifier2 : 085226344886
ExternallyAssignedProductIdentifier3 : 00739729290507
ImportDesignation : Made in the USA
IncludedComponents : Great Product
ItemName : Perko Flush Pro Valve
ItemPackageDimensions_Height : 5 inches
ItemPackageDimensions_Length : 9 inches
ItemPackageDimensions_Width : 7 inches
ItemPackageQuantity : 1
ItemTypeKeyword : boating-plumbing-fittings
Manufacturer : PERKO
Material : Stainless Steel
ModelName : Flush Pro
ModelNumber : Flush Pro
NumberOfItems : 1
NumberOfPorts : 2
PackageLevel : unit
PartNumber : 0456DP7
Pattern : Solid
ProductDescription : Diameter, 1 1/4inch Color, Stainless steel Number, 734406Flush Pro valves offer one of the easiest to use flushing systems available for inboard engines. Simply unscrew the Flush Pro cap, connect a standard garden hose, turn on the water and start your engine. The Flush Pro valve automatically pulls fresh water into the boatfts cooling system even if the boat is in the water flushing out the entire cooling system with fresh water. When done, shut off the engine, turn off and disconnect the hose and replace the Flush Pro cap. Your engine is flushed. Flush Pro also makes winterizing easy. Simply close your seacock after the system is drained, take off the Flush Pro cap and drop the 5/8inch winterizing fitting into the Flush Pro valve. Insert one end of a 5/8inch tube into the fitting and the other end into your antifreeze. Start your engine and run until the proper amount of antifreeze is sucked into the engine. Remove the winterizing fitting, replace the cap on the Flush Pro valve and youftre ready for below freezing temperatures.
ProductSiteLaunchDate : 2018-08-23T12:00:00.000-08:00
Size : One Size
SpecificationMet : ANSI, ISO, CE
StreetDate : 2017-04-22T00:00:01Z
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 40141600
ValveType : check valve
WarrantyDescription : Warranty