Cart 2 india

Specification
Brand : QTSEGSEE
BulletPoint : Motors
BulletPoint1 : Industrial Motors
BulletPoint2 : 550 9/11/12/13/14 Teeth DC Motor Drill Brushed Motor 10.8V/12V/14.4V/16.8V Motor
Color : 14.4V
ExternallyAssignedProductIdentifier : 9040065396572
ItemName : 550 9/11/12/13/14 Teeth DC Motor Drill Brushed Motor 10.8V/12V/14.4V/16.8V Motor(14 Teeth 8.2mm,14.4V)
ItemPackageDimensions_Height : 1 centimeters
ItemPackageDimensions_Length : 3 centimeters
ItemPackageDimensions_Width : 2 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : pneumatic-motors
Manufacturer : QTSEGSEE
ModelName : QTSEGSEE
ModelNumber : QTSEGSEE
NumberOfItems : 1
PartNumber : QTSEGSEE
ProductDescription : Industrial Motors
550 Drill Motor 10.8 12V 14.4V 16.8V 18V 21V 25V Motor 9 11 12 13 14 15 Teeth Replacement DC Motor for Screwdriver/Cordless Drill
- The 550 is equipped with a 9-15 gear tooth DC motor, specially designed to replace the rechargeable lithium battery cordless drill/screwdriver.
- Stainless steel shell material, pure copper coil, small current, high efficiency and strong output power.
- Low noise, high speed and high torque, good heat dissipation, stable performance and long life.
- Easy to use, the front can be fixed with 2 M3 screws.
- Widely used in cordless drills, bench drills, drill bits and screwdrivers, etc.
Support voltage: 10.8V/12V/14.4V/16.8V/18V/21V/25V
Supported gear teeth number: 9 / 11 / 12 / 13 / 14 / 15
No-load speed: 20000-30000RPM
Rated power: 80W (approx.)
Motor body length: 75.1mm; diameter: 37.2mm
Motor shaft diameter: 3.2mm; length: 12mm
Motor gear diameter: 7.9mm; thickness: 6.5mm
Motor installation dimensions: 2 M3 screws; spacing 25mm
Motor operating temperature: 0 - 50℃
Motor Storage: Temperature: 0 - 40 degrees ; Humidity: 15-90% RH
How to choose the motor of a cordless drill/screwdriver:
1. Confirm that your motor model is 550 or the motor diameter (approximately 37.2mm), motor body length (approximately 57mm), and total length (approximately 75.1mm).
2. Confirm your motor voltage (DC10.8V-25V) and select a motor with the same or similar voltage.
3. Confirm the number of teeth of your motor (9-15 teeth). Be sure to choose a motor with the same number of teeth, and confirm whether the outer diameter and thickness of the gears are the same or similar.
Some applicable lithium drill models:
10.8V: GSR 10.8-2-LI, G 10.8-2-LI, GSR 108-2-LI, G 108-2-LI
12V: GSR 12-2-LI, G 12-2-LI, GSR 120-LI, G 120-LI
14.4V: GSR 14.4-2-LI, G 14.4-2-LI, GSR 144-2-LI, G 144-2-LI
18V: GSR 18-2-LI, G 18-2-LI, GSR 180-2-LI, G 180-2-LI
GSR 10.8V LI-2
ProductSiteLaunchDate : 2024-10-26T05:32:02.251Z
Size : 14 Teeth 8.2mm
UnitCount : 1
UnspscCode : 26101200