Cart 2 india

Specification
Brand : Wizards
BulletPoint1 : Smart Abrasive Scratch and Swirl Remover: Mystic Cut compound incorporates the latest nano abrasives in car detailing. This water based compound's progressive cutting action causes no gritty mess. Best of all, it is easy to clean-up making it an excellent all-around compound for your exterior care products.
BulletPoint2 : A Safe For All Paint Cutting Compound With a High Gloss: Our scratch removal formula brings paint correction to the highest level. It is not an oily cover-up but also adds quality shine - restoring the car's original paint properties. It's perfect for custom or factory vehicle paint. You can also use it as a boat cleaner to remove exterior defects on paint, fiberglass, metallic flakes on average or neglected surfaces. It also makes a great gelcoat rejuvenator.
BulletPoint3 : Excellent All Around Polishing Compound: Wizards Mystic Cut Compound is an excellent all around compound for removing automotive surface swirls, defects, fading and water spotting. It is also safe for all vehicles, paint, chrome, and glass. This buffing compound is made without any wax, silicone, crystalline silica or scratchy abrasives.
BulletPoint4 : Easy to Clean Formulation: This water-based formula works best when used with a clean dry surface on your automobile. Safe for all vehicles, paint, chrome and glass. Works best on average or neglected surfaces such as exterior defect removal on gelcoat, paints, fiberglass, and metallic fake.
BulletPoint5 : Satisfaction Policy: Wizards Products will stand by the quality and performance stated of all items sold on this website, presuming products are used as directed for their intended purpose. If you are dissatisfied with your Wizards Products purchase for any reason please contact a customer service team member immediately.
Color : Standard
CompatibleMaterial : Fiberglass
ContainsLiquidContents : 1
CustomerPackageType : Standard Packaging
ExternallyAssignedProductIdentifier1 : 606435110385
ExternallyAssignedProductIdentifier2 : 0606435110385
ExternallyAssignedProductIdentifier3 : 00606435110385
GpsrSafetyAttestation : 1
IncludedComponents : Wizards 11038 Wizards Mystic Cut Compound
ItemDisplayWeight : 0.12 kilograms
ItemName : Wizards Mystic Cut Smart Abrasive for Auto Detailing Supplies - No Mess Scratch Remover for Vehicles - Water Based Cutting Compound - Removes Swirls, Defects, Fading, Water Spots - 8 oz
ItemPackageDimensions_Height : 18 centimeters
ItemPackageDimensions_Length : 3 centimeters
ItemPackageDimensions_Width : 7 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : automotive-polishing-clays
Manufacturer : WIZARDS PRODUCTS
Material : Resin,Wax
Material1 : Fiberglass
Material2 : Wool
ModelName : 11038
ModelNumber : 848FG21.400U
NumberOfBoxes : 1
NumberOfItems : 1
PackageLevel : unit
PartNumber : 848FG21.400U
ProductDescription : Malco Tru-Polish uses advanced abrasive technology to remove P3000 grit and finer sand scratches, car wash scratches and swirl marks left after compounding on most new and aged clear coat surfaces. This innovative polish produces a flawless, swirl-free finish with deep gloss without the use of waxes, fillers or silicones. This waterbased formula contains special lubricants for a longer work time and easy cleanup.

DIRECTIONS
Shake well before using. For best results use Tru Polish after Tru-Grit (#1200), Super Duty (#1276) or Buff Lite II (#1141).

To remove light scratches, use with a Malco Hornet Short-Cut pad (#800131) or Malco Green Polish pad (#810148). Apply a 1” (25mm) dab of TruPolish to a 2’ x 2’ (.6 m x .6 m) section and spread with the pad before initiating rotation. Buff at speeds between 1200 – 1800 rpm. Recommended buffing speed is 1400 rpm. Work the buffer slowly left to right and front to back, using light to medium surface pressure, slowly reducing pressure with subsequent passes. Do not buff to a dry surface.

Tru-Polish is designed to stay wet throughout the entire polishing process to achieve an optimal finish. If buffing surface begins to dry, apply more product and continue to buff. Wipe surface with a clean microfiber cloth .

For a flawless, swirl-free finish on dark cars, repeat polishing steps above with a seasoned Malco Blue Foam Pad (#810144) at speeds between 1000 - 1600 rpm. Recommended buffing speed is 1400 rpm.
ProductSiteLaunchDate : 2018-08-20T06:52:36.815Z
SafetyDataSheetUrl : https://www.totalboat.com/wp-content/uploads/2019/01/TotalBoat-TotalBuff-Rubbing-Compound-SDS-v.TB_.pdf
Size : 8 oz.
StreetDate : 2015-07-06T00:00:01Z
SupplierDeclaredDgHzRegulation : not_applicable
SurfaceRecommendation : Metal
UnitCount : 8
UnspscCode : 47131800
WarrantyDescription : Guaranteed Satisfaction