Cart 2 india

Specification
Brand : AYCHLG
BulletPoint1 : 1. Note:Since pool heat pumps are machines that utilize electric heat technology, please email or call us if you encounter any problems (e.g., no heating ).The built-in circulating water pump control system（Stop working after reaching the temperature, then every 15 minutes the circulating water pump circulates to check the water temperature and turns on after it is lower than the set temperature.）,no need to run your pool pump all the time
BulletPoint2 : 2.Needs electrician to install.the temperature ranged from 71.6 °F-122 °F .Material: 304 Stainless Steell;Voltage: 240V/50-60Hz;Power: 3KW;Current: 14A;Phase Parameters: Single Phase;NOTE:One interface is 50mm, the other port is 32mm, please note the size of the pipe before use.
BulletPoint3 : 3.Using a waterproof touch digital display control panel, the temperature setting and display are more accurate and clear.
BulletPoint4 : 4.Use the flow temperature sensor technology to replace the pressure switch, the machine installation requirements are reduced, and the use is more convenient
BulletPoint5 : 5.The intelligent self-inspection system comprehensively monitors the operating status of the system, and quickly makes corresponding fault judgments and displays to avoid damage to components and facilitate problem solving and maintenance.
Color : CT
ConnectivityProtocol : Wi-Fi
ControlMethod : touch
CustomerPackageType : Standard Packaging
ExternallyAssignedProductIdentifier : 6966734003479
ExternallyAssignedProductIdentifier1 : 0755205583710
ExternallyAssignedProductIdentifier2 : 755205583710
ExternallyAssignedProductIdentifier3 : 00610377442343
IncludedComponents : 3HP Pool Pump
ItemDisplayDimensions_Height : 42 inches
ItemDisplayDimensions_Length : 23 inches
ItemDisplayDimensions_Width : 23 inches
ItemDisplayWeight : 42 pounds
ItemName : AYCHLG 240V/60Hz No Plug Swimming Pool Heat Pump, Electric Swimming Pool Heater Built-in Circulating Water Pump Control System for above Ground Pools, up to 2000gallons, Max Output 12000BTU/hr
ItemPackageDimensions_Height : 38.4048 centimeters
ItemPackageDimensions_Length : 16.7894 centimeters
ItemPackageDimensions_Width : 17.0942 centimeters
ItemPackageQuantity : 1
ItemShape : Round
ItemTypeKeyword : swimming-pool-heat-pumps
ItemTypeName : CT
Manufacturer : AYCHLG
Material : Stainless Steel
MaximumFlowRate : 114 gallons_per_minute
ModelName : CT
ModelNumber : CT
MountingType : Panel Mount
NumberOfBoxes : 1
NumberOfItems : 1
OperationMode : ON-OFF
PackageLevel : unit
PartNumber : CT
PowerSourceType : ELECTRIC
ProductDescription :

Description:
Do not heat sea water or salt water
The built-in circulating water pump control system（Stop working after reaching the temperature, then every 15 minutes the circulating water pump circulates to check the water temperature and turns on after it is lower than the set temperature.）,energy efficient, does not require additional installation of circulating water pump switch and control equipment, which greatly simplifies the installation and use of the circulating system, saves the use and installation costs, and ensures the safe use of the thermostat.ST series pool heaters are special used for small pool less than 15CBM, massage pool and hot spring to heat and keep warm; Meanwhile, can be a assistant for heat pump in heating. This product adopts latest constant temperature controller, temperature sensor replaces traditional magnetic flow switch, it improves greatly of trouble free in working time, adaptability of water environment and stability

Features:
Manual reset temperature control switch:Once unexpected high temperature 60℃ occurs, the temperature switch cuts off the system. You need to cut off the main power supply, resolve the fault and wait the temperature to fall below normal temperature, then press the ‘Reset’ button to restart the heater
Unique control system: ST series are the newest generation with our unique control system. With this advanced control system, the traditional mechanical water flow sensor is replaced by modern digital temperature sensor, and the features of the temperature

Sensor technique are:
A. The flow-temperature sensor is always under the control of software, accurately monitoring the temperature status of the whole system, and then adjust the settings to maintain the water temperature and protect the heater from unexpected situations
B. No mechanical sensors, avoid any mechanical failure to affect the function of the heater
C. Avoid affection of ion accumulation to mechanical sensors
D. Greatly reduce unnecessary circulation cycles, prolong the life of circulation pumps and save more energy

Intelligent self-diagnose function:
The control system keeps on monitoring the running status of every parts of the heater, and quickly reacts and displays corresponding hint message for any incident, so as to avoid any damage or malfunction happens
If any fault happens, the heater is stopped immediately

ProductSiteLaunchDate : 2024-04-09T14:28:40.389Z
Size : 110-240v Dual Volt
StreetDate : 2022-04-19T00:00:01Z
Style : Above Ground
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
Voltage : 110 volts