Cart 2 india

Specification
Brand : AYCHLG
BulletPoint1 : 1.Note：Needs electrician to install.Suitable for pools up to 2000 gallons the temperature ranged from 71.6 °F-122 °F .The built-in circulating water pump control system（Stop working after reaching the temperature, then every 15 minutes the circulating water pump circulates to check the water temperature and turns on after it is lower than the set temperature.）,no need to run your pool pump all the time, does not require additional installation of circulating water pump switch
BulletPoint2 : 2.Material: 304 Stainless Steell;Voltage: 110V/50-60Hz;Power: 3KW;Current: 28A;Phase Parameters: Single Phase;NOTE:One interface is 50mm, the other port is 32mm, please note the size of the pipe before use.
BulletPoint3 : 3.Using a waterproof touch digital display control panel, the temperature setting and display are more accurate and clear.
BulletPoint4 : 4.Use the flow temperature sensor technology to replace the pressure switch, the machine installation requirements are reduced, and the use is more convenient
BulletPoint5 : 5.The intelligent self-inspection system comprehensively monitors the operating status of the system, and quickly makes corresponding fault judgments and displays to avoid damage to components and facilitate problem solving and maintenance.
Color : Black
ExternallyAssignedProductIdentifier1 : 0755205583758
ExternallyAssignedProductIdentifier2 : 755205583758
ItemName : Swimming Pool Heat Pump, Electric Swimming Pool Heater Built-in Circulating Water Pump Control System for Above Ground Pools, up to 2000gallons, Max Output 12000BTU/hr, Heat Exchanger,110V No Plug
ItemPackageDimensions_Height : 38.608 centimeters
ItemPackageDimensions_Length : 16.7894 centimeters
ItemPackageDimensions_Width : 16.7894 centimeters
ItemTypeKeyword : swimming-pool-heat-pumps
ItemTypeName : 3KW
Manufacturer : AYCHLG
ModelName : 3KW
ModelNumber : 3KW
NumberOfBoxes : 1
PartNumber : 3KW
PowerSourceType : Electric
ProductDescription :

Description:
Do not heat sea water or salt water
Features:
Manual reset temperature control switch:Once unexpected high temperature 60℃ occurs, the temperature switch cuts off the system. You need to cut off the main power supply, resolve the fault and wait the temperature to fall below normal temperature, then press the ‘Reset’ button to restart the heater
Unique control system: ST series are the newest generation with our unique control system. With this advanced control system, the traditional mechanical water flow sensor is replaced by modern digital temperature sensor, and the features of the temperature

Sensor technique are:
A. The flow-temperature sensor is always under the control of software, accurately monitoring the temperature status of the whole system, and then adjust the settings to maintain the water temperature and protect the heater from unexpected situations
B. No mechanical sensors, avoid any mechanical failure to affect the function of the heater
C. Avoid affection of ion accumulation to mechanical sensors
D. Greatly reduce unnecessary circulation cycles, prolong the life of circulation pumps and save more energy

Intelligent self-diagnose function:
The control system keeps on monitoring the running status of every parts of the heater, and quickly reacts and displays corresponding hint message for any incident, so as to avoid any damage or malfunction happens
If any fault happens, the heater is stopped immediately

SupplierDeclaredDgHzRegulation : not_applicable