Cart 2 india

Specification
BaseType : E26
Brand : DekLights
Brightness : 22500 lumen
BulletPoint1 : DekLight DIY grade deck lighting product, with replaceable LED bulbs unlike competitor brands. 3 year Warranty on all of our DIY Line 12 volt lighting fixtures and caps. 1 year on easily replaceable bulbs.
BulletPoint2 : Replaceable LED bulbs, allowing for the bright white 6000k, or for a warm white 3000k, with our T-10 bulbs. Never replace an entire cap again. Simply replace bulbs that may dim or burn out completely over a long time.
BulletPoint3 : Molded poly lens transmits an amazingly bright light on all four sides. 100% PVC top pyramid cap. Molded plastic base attaches easily to your 4x4 posts with 2 screws, included. If the LED bulb ever fails in the distant future, simple remove screws, life cap, and replace bulb easily.
BulletPoint4 : 3 Year Warranty on all our DIY Line low-voltage caps and fixtures. 1 year on all our replaceable LED bulbs, although an average life span on these automotive type light bulbs is 7-10 years burning 8 hours a night. For a lifetime warranty, see our Pro Line deck lighting products in our store or linked listings.
BulletPoint5 : Our caps are used extensively in the field by professional deck builders who want a product that will match their vinyl railings and reduce their callbacks for caps that dim or burn out prematurely. With our caps, they leave extra bulbs with the homeowner, and show them how easy it is to replace them should a bulb become defective in the distant future.
BulletPoint6 : Our included 3M style gel-filled connectors allows you to easily connect your 12 volt +/- power supply to your post cap, and daisy chain to your next post cap or light fixture without the need for additional splitters or power hubs that can become expensive. No wire stripping needed. Simply insert your wires and crimp connector closed with pliers.
BulletPoint7 : These can also be used on wood 4x4 posts, which have an acual outside measurement of 3.5"x3.5" ( 3-1/2"x3-1/2"), using the supplied adapter that will downsize the bottom mount from the 4x4 vinyl post fitment to a 3-1/2x3-1/2 fitment. Important note: Installing 12 volt caps with replaceble bulbs on wood posts require a 1½" hole drilled into the top of the wood post, 3-4 inches deep, to allow for the bulb housing and gel-connectors. Drill a hole (slightly angled up) on one of the 4 sides of your post for your low-voltage wire. See picture detailing this in the gallery. Instructions showing this method also included with cap(s).
Color : White Cap 3000k bulb
ColorTemperature : 3000 kelvin
ControllerType : Push Button
ControlMethod : application
Edition : Standard Edition
ExternallyAssignedProductIdentifier : 6944378376036
ExternallyAssignedProductIdentifier1 : 611728314074
ExternallyAssignedProductIdentifier2 : 0611728314074
FinishType : Bronze
FixtureType : Freestanding
IncludedComponents : 4x4 Post Cap, 1 - LED bulb, 2 - 3M style Gel Filled Connectors
IndoorOutdoorUsage : outdoor
InstallationType : Surface Mount
ItemDisplayDimensions_Height : 16 inches
ItemDisplayWeight : 5.65 pounds
ItemName : DekLights® DIY Line LED Lighted Post Cap for 4x4 Deck/Fence Posts. Wired 12volt Low Voltage with Replaceable LED Light Bulb. for Your Vinyl or Composite railings. Made in USA (White Cap 3000k Bulb)
ItemPackageDimensions_Height : 2 inches
ItemPackageDimensions_Length : 6 inches
ItemPackageDimensions_Width : 6 inches
ItemPackageQuantity : 1
ItemShape : Square
ItemTypeKeyword : outdoor-post-lights
LightColor : Bright White
LightingMethod : incandescent
Manufacturer : DekLights
Material : Polyvinyl Chloride, PVC, Poly Lens
ModelName : DekLights DIY 4x4 Cap 12volt
ModelNumber : DLTREXCAP
MountingType : Wall Mount
NumberOfItems : 1
NumberOfLightSources : 1
PackageLevel : unit
PartNumber : DLDIY4x4CAP-White
PowerSourceType : 12 Volt
ProductDescription : DekLights DIY Line LED Lighted Post Cap for 4x4 Deck Post Sleeves, and now 3.5x3.5 wood posts, with our new bottom that included adapter to work with both 4"x4" and 3-1/2"x 3-1/2" sizes. Wood posts will require an 1½ hole drilled into the top of post to allow for bulb housing and wire harness. (See picture in gallery). Our budget friendly 12 volt lighted post cap with replaceable LED bulb. To use with your vinyl or composite railings. Made in USA DekLights brand DIY Line low-voltage lighted post cap with replaceable LED bulbs for your 4x4 vinyl or composite deck railing posts. Perfect for vinyl deck of fence posts. LED safe from weather in a glass bulb housing that will never yellow, haze up, become brittle or crack. Main clear lens is molded plastic, unlike our Pro Line Glass Edge style, which features a 100% acrylic (PlexiGlass) lens. Fits all posts with a 4 inch x 4 inch outside measurement. For all brand vinyl and composite 4x4 post sleeves. Not for Trex. If using Trex post sleeves, see our line of lighted caps made specifically for a 4.5"x4.5" post with beveled corners. Our vinyl / PVC post caps are made to blend with your white vinyl or composite railings. We can also make these in any color vinyl you have. Beige, Almond, Khaki, etc. Our caps have replaceable LED bulbs which can be bright white 6000k a warm white 3000k. Select when purchasing.
ProductSiteLaunchDate : 2025-03-24T23:19:10.525Z
RecommendedUsesForProduct : Deck Lighting
RoomType : Outdoor
Size : 20cm
SpecificationMet : ETL
SpecificUsesForProduct : Home
Style : Classic
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
SwitchType : Push Button
Theme : Modern
UnitCount : 1
UnspscCode : 39112000
Voltage : 12 volts
WarrantyDescription : Lifetime on cap for any defects (not damage due to use) and 1 year on replaceable led bulb.
WarrantyType : Manufacturer
WaterResistanceLevel : water_resistant
Wattage : 150 watts