Cart 2 india

Specification
Brand : LGXEnzhuo
BreedRecommendation : Small Breeds
BulletPoint1 : 【6MM FEED PELLET MILL MACHINE】This machine can quickly make chicken feed,grinding disc hole diameter is 6MM(We also have different size of disc,such as 2mm,3mm,4mm,5mm,6mm,8mm,12mm).The rollers and grinding discs of this product are hardened at high temperature and are very wear-resistant and durable.Machine size30*34inch.Maximum output:200kg/h
BulletPoint2 : 【WIDE APPLICATION】The machine is mainly suitable for the processing of rabbits,fish, ducks,chickens,shrimps,pigs,cattle,sheep and industrial pellets.Widely used in industrial,plastic pellets,organic fertilizer particles,wood pellets,etc
BulletPoint3 : 【LONG SERVICE LIFE】The machine uses gears as transmission,eliminating the problems of slipping and belt wear caused by traditional belt transmission.Adopt thick copper wire motor, strong power, good heat dissipation and stable running performance.
BulletPoint4 : 【ENLARGED FEED PORT】The machine adopts the design of enlarged feed port,which makes it more convenient for you to feed and effectively improves work efficiency.
BulletPoint5 : 【BETTER NUTRIENT RETENTION】The feed processed by the machine is smooth and has moderate hardness.The temperature-change during the process is slight so the nutrition can be contained very well
Capacity : 200 kilograms
CareInstructions : Hand Wash Only
Color : Blue
ExternallyAssignedProductIdentifier : 00810111660747
ExternallyAssignedProductIdentifier1 : 0785869958364
ExternallyAssignedProductIdentifier2 : 785869958364
ItemName : LGXEnzhuo 6MM Chicken Feed Pellet Mill Machine Animal Feed Pellet Machine Feed Granulator Machine Three-Head Pressure Roller 220V 4.5KW 200KG/H
ItemPackageDimensions_Height : 30 inches
ItemPackageDimensions_Length : 37 inches
ItemPackageDimensions_Width : 18 inches
ItemPackageQuantity : 1
ItemTypeKeyword : poultry-feeding-equipment
Manufacturer : LGXEnzhuo
Material : Plastic
ModelName : Heavy Duty Chick Feeder
ModelNumber : 6MM
PartNumber : E239173
ProductDescription : Precautions
1.When using, it should be noted that there should be no foreign matter such as stones and iron blocks in the raw materials. After the pellet machine has been working continuously for more than ten shifts, the pressure roller oil hole, the universal joint oil hole, and the linkage shaft oil hole need to be filled with high-temperature lubricating grease to make the pressure roller Good working performance and extended bearing life.
2.During granulation, it is strictly forbidden for the pressure roller to contact with the template to run idly, and the continuous feeding can not be interrupted.At the same time, the pressure roller shaft nut is locked to avoid loosening and damaging the spindle key way.
3.When granulating, there is no granulation, no discharge, the template should be removed, and after opening one by one, some fiber feed can be added appropriately to restart the granulation.
4.Always check the tightness of the screws in each part of the machine. If there is oil leakage in the gearbox, replace the oil seals in time, and check whether the bearings in the machine head are short of oil.
5.When the pellet machine is working, do not reach into the feeding port with your hands. If necessary, use wooden sticks to help feed the pellets.
6.Before turning on the machine, it is necessary to add less material before turning on the machine.When shutting down, leave a small amount of feed in the machine to prevent the press roller of the machine from contacting the template from idling.
7.If the machine is stuck in operation, stop it immediately, press the pressure roller until the bolt is flat,and then restart the machine.
8.Each time the work is completed, the adjusting pressure roller bolts must be loosened.
ProductSiteLaunchDate : 2022-07-12T08:13:25.426Z
Size : 6MM
Style : 6MM
UnitCount : 1
UnspscCode : 27112700
Voltage : 220 volts
Wattage : 4.5 kilowatts