Cart 2 india

Specification
Brand : Pxm&MM
BulletPoint1 : How does it work？Built in High sensitivity vibration sensor for control the obd power cable work，As soon as the vehicle vibrates, the obd adapter will immediately provide power to the dashcam，such as:Vehicle start,moved,Large vehicles pass by from the side,the car is hit, ,the door are opened or closed etc [Note] Whether the OBD constant power cable works is not related to whether the vehicle starts, but only depends on whether the vehicle vibrates detected
BulletPoint2 : 90 Degree USB-A to USB-C Charger Cable,Bold pure copper power cord, supporting 3A current output, especially suitable for powering dash camera 【Note】 only be used as a power cord, without data transmission
BulletPoint3 : OBD II power adapter Automatically detect voltage and provide protection. When the voltage you set is reached, the OBD constant power cable will automatically cut off the power supply to prevent excessive discharge of the car battery and ensure that the vehicle can start normally
BulletPoint4 : 24/7days power supply mode，The OBD constant power cable time setting in P mode,it will continue to supply power to the dashcam，When the voltage of the car battery is lower than the set voltage, it will cut off the power supply to the dashcam
BulletPoint5 : ⅠorⅡ mode,After the vehicle has been stationary for 3 or 10 minutes,the OBD constant power cable will be cut off the power supply to dashcam, But if the power cable detects vibration again,sush as the Vehicle start,moved,hit,the door are opened or closed, the OBD II power adapter will immediately start automatically to power the dashcam and record what is happening. The OBD constant power cable will turn off the power supply again 3 or 10 minutes after detecting the last vibration. The time of turn off power supply again depends on your time settings. [Note] This function will only be activated when the voltage of the car battery is higher than voltage of the low voltage protection you set
BulletPoint6 : Equipped with dual USB-A ports, it can simultaneously power two USB devices. Provide greater flexibility and practicality for your vehicle
BulletPoint7 : What You Get:1×OBD Constant Power Cable，1× 9.8Ft 90 Degree USB-A to USB-C Charger Cable，1× User Manual
CompatibleDevices : SDS100 Uniden Bearcat Police Scanner Radio
CompatiblePhoneModels : SDS100 Uniden Bearcat Police Scanner Radio
ConnectivityTechnology : wired
ConnectorGender : Male-to-Male
ConnectorType : MagSafe
CurrentRating : 3 amps
ExternallyAssignedProductIdentifier1 : 633755257407
ExternallyAssignedProductIdentifier2 : 0633755257407
FrequencyRange : 60HZ
IndoorOutdoorUsage : outdoor
InputVoltage : 12 volts
ItemName : OBD Constant Power Cable with 9.8Ft USB-A to USB-C Charger Cable for dashcam,24/7days Power Supply Mode,Low Voltage Protection,OBD-II Port Power Supply,Plug and Play,11.6-36V to 5V 3A
ItemPackageDimensions_Height : 12.3952 centimeters
ItemPackageDimensions_Length : 4.191 centimeters
ItemPackageDimensions_Width : 8.3058 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : vehicle-audio-video-power-adapters
Manufacturer : pxm&mm
ModelName : Compatible with: Dirt Devil Gator 10.8V Hand Vacuum bd10100 Replacement AC DC SMALL-Adapter Power
ModelNumber : KHOI1971 ® CUSTOM MADE
NumberOfItems : 1
NumberOfPins : 6
OutputVoltage : 12 volts
PartNumber : KHOI1971 ® CUSTOM MADE
PowerSourceType : CAR 12V
ProductDescription : obd power cable for dash camera,Dash Cam Hardwire Kit
ProductSiteLaunchDate : 2025-01-03T12:39:43.514Z
SpecificationMet1 : CE
SpecificationMet2 : FCC
SpecificationMet3 : RoHS
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
TotalUsbPorts : 1
UnspscCode : 43202222
WarrantyDescription : 1 year
Wattage : 50 watts