Cart 2 india

Specification
Brand : Walfront
BulletPoint1 : Knob Control: The board is equipped with treble and bass control, which can be adjusted through the knob, convenient and quick.
BulletPoint2 : Good : version 5.0, the distance can 10 meters in an open environment, can also use a 3.5mm headphone plug.
BulletPoint3 : Stereo Channel: The power amplifier board module is stereo channel output to ensure continuous serial high power .
BulletPoint4 : Circuit : With overheating , circuit , overvoltage and undervoltage , and .
BulletPoint5 : Use Excellent Chip: Using TPA3116D2 chip, with AM interference suppression, has low interference and good effect.
ItemName : Channel Power Amplifier Zk-502t, Module Stereo AMP Board with Treble Bass Control ZK‑502T
ItemPackageDimensions_Height : 5 centimeters
ItemPackageDimensions_Length : 13 centimeters
ItemPackageDimensions_Width : 9 centimeters
ItemTypeKeyword : power-amplifiers
Manufacturer : WALFRONT
Material : PCB
MaximumSupplyVoltage : 24 volts_of_direct_current
ModelName : Walfrontdkxzrpombs
ModelNumber : WALFRONTdkxzrpombs
MountingType : Surface Mount
NumberOfChannels : 2
NumberOfItems : 1
OutputPower : 50 watts
PackageTypeName : Box
PartNumber : WALFRONTdkxzrpombs
ProductDescription : 1. Stereo Channel: The power amplifier board module is stereo channel output to ensure continuous serial high power .
2. Knob Control: The board is equipped with treble and bass control, which can be adjusted through the knob, convenient and quick.
3. Good : version 5.0, the distance can 10 meters in an open environment, can also use a 3.5mm headphone plug.
4. Circuit : With overheating , circuit , overvoltage and undervoltage , and .
5. Use Excellent Chip: Using TPA3116D2 chip, with AM interference suppression, has low interference and good effect.

Specification:
Item Type: Power Amplifier Board Module
Material: PCB
Model: ZK-502T
Chip: TPA3116D2 (with AM interference suppression)
Version: 5.0 (unobstructed, approx. 10 meters / 32.8ft)
to Noise Ratio: >90 dB
Input Method: +
Number of Channels: Left and right channels (stereo)
Adapter Power Supply: DC 9-24V, 3A or (24V battery set is not allowed)
Adaptation Speaker: 15-100W, 4-8Ω
Power Supply Voltage: 12V, 8Ω 15W+15W, 4Ω 30W+30W
19V, 8Ω 20W+20W, 4Ω 40W+40W
24V, 8Ω 30W+30W, 4Ω 50W+50W
Mechanism: Overheating, overcurrent, short circuit

Package List:
1 x Power Amplifier Board Module(Finished Product)
1 x Heat Sink Block
1 x Cable
1 x Screw
1 x Screwdriver

Notice:
Do not use it outside the voltage and current range.

ProductSiteLaunchDate : 2023-07-03T17:27:14.137Z
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 52161547
Voltage : 24 volts