Cart 2 india

Specification
Brand : CRIDENG
BulletPoint1 : 【Wide Voltage Input】This power supply module accepts a wide range of input voltages, from AC85-265V or DC120-370V, making it suitable for use in various settings.
BulletPoint2 : 【New IC Solution and Accurate Output】Equipped with a new IC solution and materials, this module utilizes a 431 voltage regulator to ensure accurate and stable output voltage. It provides sufficient power and current to meet your needs.
BulletPoint3 : 【Overload, Short Circuit, and Over Temperature Protection】Built-in protection mechanisms such as overload, short circuit, and over temperature protection ensure the stable performance and long service life of this module, keeping both your device and the module safe.
BulletPoint4 : 【Filter Circuit and High Efficiency】Featuring an filter circuit, this module effectively reduces electromagnetic interference. It also provides high and low voltage isolation between input and output, resulting in low ripple noise and high efficiency.
BulletPoint5 : 【Reliable】With a small size and full functionality, this module has undergone a full load aging test to ensure its reliability. It boasts a normal working life of more than 26,000 hours, making it long-lasting option for your power supply needs.
Color : as picture show
ItemName : RH-K5W-12V0.4A Power Module, Wide Voltage Input AC85-265V Or DC120-370V, Voltage Regulation, Voltage Regulation Output, Short Circuit Protection, Over Temperature Protection,
ItemPackageDimensions_Height : 1 centimeters
ItemPackageDimensions_Length : 11 centimeters
ItemPackageDimensions_Width : 5 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : power-entry-modules
Manufacturer : CRIDENG
Material : PCB
ModelName : Walfrontgqo0p36rcd
ModelNumber : A75480628YB1V3FL2FEGPFYYA60MIX
PartNumber : A75480628YB1V3FL2FEGPFYYA60MIX
ProductDescription :

Features:

* .

* wide voltage input AC85-265V or DC120-370V.

* New IC solution, materials, 431 voltage regulation, voltage regulation output, accurate output, sufficient power and current.

* With overload, short circuit, over temperature protection, stable performance, long service life.

* With for EMI filter circuit, input and output high and low voltage isolation, output low ripple noise, high efficiency.

* After full load aging test, small size, full function, small interference.

* Normal working life is more than 26,000 hours.

Specifications:

Model:RH-K5W-12V0.4A

*Input characteristic：

AC input:85-265V AC

DC input:120-370V DC

Frequency range:47-63Hz

Surge current: Cold start:10A/220VAC

Leakage current:<2mA/220VAC

Standby power consumption:≤150mV/230VAC

*Output characteristic：

Output voltage:12V DC

Rated current:0.4A

Current range:0-400ma

Rated power:5W

Efficiency:83%

Output accuracy:±1%

Voltage adjustment rate:±1%

Load adjustment rate:±1%

Ripple:80-100mV

Switch overshoot:10%

Leakage current:<5MA/220VAC

Start, rise, and hold time:2000ms./30ms/115V AC

1000ms./30ms/230V AC

DC short-circuit protection: In isolation mode, the power automatically recovers after the exception is removed

Overvoltage protection:>50%

Overload protection: 110%-170% of rated output power

Operating temperature, humidity:-20-+70℃ 20%-90% no condensation

Storage temperature and humidity:-40-+85℃ 10%-95%RH

Size(length* width* height):58*30*23mm

Remarks:

1. If not specifically stated, all specifications are in the input 220VAC, rated load, 25℃ ambient temperature.

2. Accuracy: including setting error, voltage adjustment rate, load adjustment rate.

3. Ripple test: Connect the power supply and load with a 30CM long stranded wire. The load end and 0.1UF and 47UF capacitors are measured by 20MH oscilloscope at the load end.

4. Voltage adjustment rate: under rated load conditions, the input voltage from low to high change measured.

5. Load adjustment rate: measured output from 0% load to 100% load change measured.

Package Content:

1 x Power module

Matters needing attention

1, before using the power supply, first determine whether the input and output voltage specifications are consistent with the nominal value of the power supply used.

2, before power, check whether the input and output leads are correct, so as not to damage the user equipment and burn the power supply.

3, the bare board power supply board bottom component foot can be conductive, the test hand do not touch the bottom of the board, need to pad the bottom of the board insulation rubber, or clean paper and other non-conductive things, so as to avoid the risk of electric shock and burning the power board.

ProductSiteLaunchDate : 2024-12-01T14:45:30.039Z
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
TargetAudienceKeyword : unisex-children
UnspscCode : 60141000