Cart 2 india

Specification
Amperage : 15 amps
Brand : XTAR
BulletPoint : LIFE TIME WARRANTY
BulletPoint1 : Why DC powered: Living off-grid, or in a motorhome, power consumption can be critical. The Starlink uses a lot of AC power. Having to convert our battery DC power into AC through an inverter, then back to DC through a power supply is not the most efficient way to power any device. It can be converted to dc power for a significant savings in draw as well as savings from not having the dc to ac conversion.
BulletPoint2 : Convenient & Cost-effective: XTAR-Link EL3 V2 Conversion combines a 10/30 volts to 48 volts booster, PoE injector, and 12V voltage regulator into one unit, providing a professional and reliable power solution for Starlink Gen 2 dish. This reducing the complexity of DIY , risks of operational failure, and also save cost of additional DIY components. No Wire cutting, no modifying the dish or cable, and no voiding your Starlink warrant. y!
BulletPoint3 : Dual Efficiency in Power Saving: It not only saves up to 30% of the power that run Starlink products, but also reduces the energy consumption of routers. It includes a built-in 12V regulator directly connect to 3rd party router. It significantly reduces the power loss of router from DC-AC-DC conversion.
BulletPoint4 : Easy to install without any tools：1) Connect the starlink cable to the CB2 converter (it's worth mentioning that with it you don't need to cut the original starlink cable) 2)With the Anderson Interface, you can use the Anderson Interface-DC Connection Cable to connect to your outdoor power supply, or to your 12V battery. 3）Connecting the Router. EL3 V2 DC Convension lets you takes your Starlink wherever your journey takes you.
BulletPoint5 : Full protection : Protected by waterproof, shockproof, and corrosion-resistant metal casing, it also features a power switch, built-in reliable fuses, and a power indicator light to ensure a safe and stable connection to the Starlink network in various environments.
BulletPoint6 : 【 KIT 】Include: 1x XTAR-Link EL3 V2; 1x Power Cable of EL3 V2: O-ring to Anderson: 1x RJ45 Adapter for Gen2 Dish (Aquated Standard); 1x RJ45 cable for Dishy adpater; 1x Power cable for 3rd Router(DC5521 Male to DC5521 Male)
BulletPoint7 : 【 SET 】Include: 1x XTAR-Link EL3 V2 1x Power Cable of EL3 V2: O-ring to Anderson 1x RJ45 Adapter for Gen2 Dish (Aquated Standard) 1x RJ45 Cable A for Dishy Adapter 1x 3rd Router: WiFi 6 (574 Mbps/2.4 GHz & 1000 Mbps/5 GHz) 1x RJ45 Cable for Router 1x Power cable for 3rd Router(DC5521 Male to DC5521 Male) 1x Additonal AC power adapter for 3rd Router
Color : Black
CompatibleDevices : Deep-Cycle Batteries, Solar Panels, Wind Turbines
CompatibleDevices1 : Cellular Phones
CompatibleDevices2 : Laptops
CompatibleDevices3 : Tablets
CompatibleDevices4 : Cameras
CompatibleDevices5 : GPS
ConnectivityTechnology : MagCode
ConnectorType : MagCode
CurrentRating : 15 amps
CustomerPackageType : Protective Packaging
ElectricalOutputWaveform : pure_sine_wave
ExternallyAssignedProductIdentifier : 9688162140973
ExternallyAssignedProductIdentifier1 : 0656382836654
ExternallyAssignedProductIdentifier2 : 656382836654
FormFactor : Magnetic Connector
FrequencyRange : 50Hz - 60Hz
IncludedComponents : 1 x 12V 1A Fuse
InputVoltage : 12 volts
IsPortable : 1
ItemName : XTAR EL3 V2 Starlink DC Conversion Kit for GEN 2 Dish, 12V to 48V, 5 in 1 Outdoor Fast Internet，Maximize Power Conversion Efficiency, reducing Energy Loss (EL3 V2-Set)
ItemPackageDimensions_Height : 4 centimeters
ItemPackageDimensions_Length : 23 centimeters
ItemPackageDimensions_Width : 8 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : vehicle-power-inverters
Manufacturer : XTAR
Material : Ethylene Vinyl Acetate (EVA)
Material1 : Metal
Material2 : Copper
ModelName : Sports
ModelNumber : EL3 V2-SET
MountingType : Travel/Portable
NumberOfItems : 1
NumberOfPorts : 1
NumberOfPowerLevels : 1
OutputCurrent : 15 amps
OutputVoltage : 48 volts
PackageLevel : unit
PartNumber : 12VTO220V-66169020
PeakOutputPowerWatts : 3000
PowerPlugType : type_g_3pin_uk
PowerSourceType : Battery Powered
ProductDescription : The XTAR EL3 V2 starlink dc conversion kit is a versatile solution for powering your Starlink Gen 2 satellite internet system. This kit allows you to convert a 12V power source to the required 48V for seamless connectivity. With multiple interface: Anderson, POE, RJ45, LAN, and a 12V router interface, you can easily integrate it into your existing setup. The starlink dc conversion kit ensure reliable operation. Whether you're setting up a remote workstation or need a backup power solution for your Starlink, this conversion kit offers convenience and flexibility. Enjoy uninterrupted internet access with the XTAR EL3 starlink dc conversion kit.
ProductSiteLaunchDate : 2024-05-21T14:54:49.458Z
Size : 1 FEET,BOTH END 3/8
SpecificationMet : IEC
Style : Classic
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
TotalUsbPorts : 2
UnitCount : 1
UnspscCode : 43222612
Voltage : 12 volts
WarrantyDescription : 1
Wattage : 300 watts