Cart 2 india

Specification
Brand : Kavolet
BulletPoint1 : [Versatile Connectors] Three connector types and seven wavelength measurements for flexible usage.
BulletPoint2 : [Wide Temperature Range] Operates effectively from -10 to +60℃.
BulletPoint3 : [Accurate Measurements] High and quick response ensure results.
BulletPoint4 : [sturdy Design] to shock and wear, providing performance.
BulletPoint5 : [Portable Power] Powered by 3 aa batteries for convenience and easy replacement.
Color : Blue Words
ExternallyAssignedProductIdentifier : 7698310004714
IncludedComponents : No
ItemName : Fiber Optical Power Meter 800-1700nm SC FC ST Connector Measure -70+6db IngaAs Shockproof Temperature -10+60℃ AA Battery (Optical Power Meter)
ItemPackageDimensions_Height : 5 centimeters
ItemPackageDimensions_Length : 21 centimeters
ItemPackageDimensions_Width : 12 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : industrial-power-meters
Manufacturer : Kavolet
MeasurementAccuracy : 0.1mm
ModelName : Kavolet6c4gkmvo0x-11
ModelNumber : Kavolet6c4gkmvo0x-11
NumberOfItems : 1
PartNumber : Kavolet6c4gkmvo0x-11
PowerSourceType : Battery Powered
ProductDescription : [Versatile Connectors] Three connector types and seven wavelength measurements for flexible usage.
[Wide Temperature Range] Operates effectively from -10 to +60℃.
[Accurate Measurements] High and quick response ensure results.
[sturdy Design] to shock and wear, providing performance.
[Portable Power] Powered by 3 aa batteries for convenience and easy replacement.

Spec:

Item Type:Fiber Optical Power Meter
Wavelength Range: 800-1700
Connection Port: SC/FC/ST
Probe Range: IngaAs
Measuring Range: -70~+6db
Uncertainty: ±5%
Linear Display: 0.1%
Working Temperature: -10~60℃
Storage Temperature: -25~70℃
Automatic Shutdown Time: 10min
Battery:3 x AA Battery(Not Included)



Package List:
1 x Power Meter
1 x Connector


Note:
The LED display is weak and the boot cannot be displayed.
It may be because the battery is low, you can replace the battery in time.
LED display data is not normal?
It is possible that the connector is faulty, dirty or locked. Reconnect the connector and clean the sensor
How to restore the factory settings?
Press the in + zero button at the same time
The calibration steps are as follows:
1. Press the λ + LIGHT button at the same time, the nm at the end of the first line is not displayed.
2. Each time the LIGHT button is pressed, the power value is increased by 0.05dBm, and the power value is adjusted to the standard value by these two buttons.
3. Press the zero button to save
4. Restart the optical power meter or press the in + LIGHT
The nm at the end of the first line of the key is displayed and ready for use.


ProductSiteLaunchDate : 2025-01-16T06:26:25.477Z
Size : Optical power meter
SkipOffer : 1
Style : VTSYIQI2025011516221236VTSYIQI
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 26111700