Cart 2 india

Specification
Brand : Lianshi
BulletPoint1 : Input voltage range: 5-30V
BulletPoint2 : Output current: 0.15A - 2A adjustable
BulletPoint3 : Output voltage: 1.25V - 26V (Step-down mode output is always 2V lower than above)
BulletPoint4 : Threshold parameter: Maximum input 32V maximum output current 2.6A
BulletPoint5 : Specific gravity to 1.1
BulletPoint6 : Fluid temperature to 150F
BulletPoint7 : Ambient air temperature to 77F
Color : White
CompatibleDevices : 电动工具
Configuration : not_applicable
ConnectivityTechnology : DC Barrel
ConnectorType : barrel connector
CoolingMethod : Air
CurrentRating : 2 amps
ExternallyAssignedProductIdentifier : 6282234039559
ExternallyAssignedProductIdentifier1 : 0799355588898
ExternallyAssignedProductIdentifier2 : 799355588898
ExternallyAssignedProductIdentifier3 : 00010121825147
GpsrSafetyAttestation : 1
IncludedComponents : 2 x USB Cable
InputVoltage : 12 volts
IsPortable : 1
ItemName : Lianshi Power Supply Voltage Regulator DC-DC Adjustable Constant Voltage Constant Current Supply LED Driver Module
ItemPackageDimensions_Height : 6.75 inches
ItemPackageDimensions_Length : 1 inches
ItemPackageDimensions_Width : 7.25 inches
ItemPackageQuantity : 1
ItemShape : circle
ItemTypeKeyword : science-lab-power-supply-units
Manufacturer : Accessory
Material : Polypropylene
ModelName : 0554 1105
ModelNumber : WYDY
MountingType : Wall Mount
NumberOfItems : 1
OutputCurrent : 1.8 amps
OutputVoltage : 12 volts
OutputWattage : 1000 watts
PackageLevel : unit
PartNumber : WYDY
Pattern : not_applicable
PowerPlugType : type_f_2pin_de
PowerSourceType : Battery Powered
ProductDescription : Specification:
Constant current value adjustment: With a multimeter current file directly switch off the output, set the board to the left of the precision potentiometer, increase clockwise, counterclockwise to reduce the constant current point, then the constant current value can be displayed on the multimeter!

Constant voltage setting: no load, connect the output of the power supply to a multimeter voltage stand, set the board to the right of the precision potentiometer, clockwise increase the voltage output, counterclockwise to reduce the voltage output, this time the constant Pressure Can be in the multimeter display!

Application:
1. Set your own precisely adjustable constant voltage constant power supply.
2. charge the variety of battery, and adjust the charging current band, constant voltage constant current display. Full of power outages.
3. Drive a variety of LED, convenient power setting, suitable for a variety of LED combinations.

Package content:
1 x module
ProductSiteLaunchDate : 2018-05-04T07:00:00.000Z
Scent : not_applicable
Size : not_applicable
SpecificationMet : MEPS
Style : Modern
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 32101600
Voltage : 230 volts
Wattage : 200 watts