Cart 2 india

Specification
Brand : SCHNEIDER ELECTRIC
BulletPoint1 : Xfmr Dry 1Ph .75Kva 120X240-Volt -12/24-Volt
BulletPoint2 : Schneider Electric 750SV43F
BulletPoint3 : Package quantity: 1
BulletPoint4 : Load regulation: ±0.5%
BulletPoint5 : Voltage regulation: +0.5% 2. The peak current output current should not exceed 2A Note that the input and output cannot be connected in reverse. Reverse connection may burn out!
Color : Gray
CompatibleDevices : PC
CompatiblePhoneModels : PC
ConnectivityTechnology : Powerline
ConnectorType : Connector
CurrentRating : 3 amps
ExternallyAssignedProductIdentifier : 6272387834118
ExternallyAssignedProductIdentifier1 : 785901019930
ExternallyAssignedProductIdentifier2 : 0785901019930
ExternallyAssignedProductIdentifier3 : 00785901019930
IncludedComponents : 750SV43F
InputVoltage : 240 volts_of_alternating_current
ItemName : SCHNEIDER ELECTRIC 750SV43F Xfmr Dry 1Ph .75Kva 120X240-Volt-12/24-Volt
ItemPackageDimensions_Height : 35.814 centimeters
ItemPackageDimensions_Length : 20.32 centimeters
ItemPackageDimensions_Width : 20.574 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : electronic-power-transformers
Manufacturer : SCHNEIDER ELECTRIC
Material : Copper
MaximumFrequency : 60 hertz
MinimumFrequency : 50 hertz
ModelNumber : 750SV43F
MountingType : PCB Mount
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : 750SV43F
PowerSourceType : Corded Electric
ProductDescription :

1. Adopt the conventional BOOST fully integrated constant voltage output solution, internally integrated MOSFET, few peripheral devices, and low system cost;

 2. Wide voltage range input, input voltage up to 35V; 

3. Adjustable output voltage, up to 40V; 

4. Built-in over-temperature protection, over-current protection, full set of reliability protection circuits, high reliability; 

5. System conversion efficiency can be more than 90%, convenient for thermal design; 6. TO263-5L standard package, suitable for boost applications within 30W. 

6. Connect the power supply (3-35V), the power indicator light is on, and the module works normally. 

7. Adjust the blue potentiometer knob (generally counterclockwise rotation for boost, clockwise rotation for buck) and use a multimeter to monitor the output voltage until the required voltage is reached. 

8. It is recommended to use a current within 2 for long-term work, and add a heat sink (output above 10W); because it is a boost module, in order to ensure output stability, please keep a small 1.5V voltage difference. 

9. Car-mounted voltage-stabilized power supply. Just connect the input end of this module to the power supply, and you can adjust the potentiometer. The output voltage can be adjusted arbitrarily between 5V and 30V. It can power your mobile phone, MP3, MP4, PSP charging and many other devices. It is very simple and convenient. 

10. Power electronic equipment. When the device needs 5V-35V power supply and the corresponding voltage power supply is in hand, this module can be used to easily adjust the voltage to the required voltage to solve the problem. 

11 System working voltage test. When doing projects, you can use this module to debug various voltage test system working voltage ranges, which is very easy and convenient.

ProductSiteLaunchDate : 2012-02-28T19:07:01.020Z
Size : 220V to 110V 50W
SpecificationMet : UL
SpecificationMet1 : CSA
SpecificationMet2 : UL
SpecificationMet3 : IP
SpecificationMet4 : NEMA
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredDgHzRegulation1 : not_applicable
SupplierDeclaredDgHzRegulation2 : not_applicable
SupplierDeclaredDgHzRegulation3 : not_applicable
SupplierDeclaredDgHzRegulation4 : not_applicable
SupplierDeclaredDgHzRegulation5 : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 26111704
Wattage : 500 watts