Cart 2 india

Specification
Brand : ANMBEST
BulletPoint1 : Designed for GEN 3: Starlink Ethernet Adapter Gen 3/Mini is designed for Starlink Gen 3 Stardard and Mini dish. You can use any type of Ethernet cable direct connect to Starlink Standard V3 and MINI, and make it waterproof.
BulletPoint2 : High Performance: Plug and play adapter eliminates the need for cutting or crimping original Starlink cables. Engineered for all-weather, heavy-duty use, reduce 50% contact resistance. Keeping your Starlink gen3 system operating at its best.
BulletPoint3 : Indoor&Outdoor: Since most installations will require the cable to be run along a roof, or down an exterior wall, a waterproof coupler is essential.Starlink RJ45 coupler features a robust IP68 waterproof kit, offering superior protection from moisture, dirt, and other environmental factors that could potentially disrupt your network performance in both indoor and outdoor.
BulletPoint4 : High Transmission Speed: Male-to-female extender made with 24AWG 100% pure copper, ensuring strong signal and fast data transmission up to 1200Mbps, and full-metal shielding protective layer reduces signal interference.
BulletPoint5 : Tips: Connect Starlink extension repair adapter to RJ45 Ethernet cable lengths your needs, effortlessly extend or repair your starlink network setup. Suggest ethernet cable length under 175ft (50m) helps maintain reliable operation and minimizes potential interference or signal loss.
BulletPoint6 : MoCA Protected Setup (MPS) for secure connection between MoCA devices. Maximum 16x MoCA devices can collaborate in the same coax network.
BulletPoint7 : Enable tablets, smart phones, gaming APPs/consoles and 4K/8K HDTV to access content simultaneously. Plug and Play installation over the existing coaxial wiring without re-wiring of Ethernet cables.
BulletPoint8 : High-frequency (1125 to 1675 MHz) modulation allows Cable TV or Terrestrial TV signals overlay without interference.
Color : Black
CompatibleDevices : Television
CompatibleDevices1 : Starlink Router
CompatibleDevices2 : Ethernet-enabled Devices
CompatibleDevices3 : Internet Protocol Camera
CompatibleDevices4 : Printer
ConnectorGender : Male-to-Male
ConnectorType : RJ45
DataLinkProtocol : Gigabit Ethernet
DataTransferRate : 1200 megabytes_per_second
EthernetCableCategory : cat_5e
FinishType : Gold
HardwareInterface : ethernet
IncludedComponents : Ethernet Adapter, Rj45 Coupler
IncludedComponents1 : MN2580 MoCA 2.5 Adapter x 2
IncludedComponents2 : AC/DC Power Adapter
IncludedComponents3 : Ethernet Cable (CAT5e)
IncludedComponents4 : Coax Cable (RG6)
IncludedComponents5 : Start Guide
IndoorOutdoorUsage : indoor
InterfaceType : RJ45
ItemName : ANMBEST Starlink Ethernet Adapter Gen 3/Mini, IP68 Waterproof Standard V3/Mini Dish and Router Connector, Starlink Cable Extension to RJ45 Ethernet Cable Interface
ItemPackageDimensions_Height : 0.8 inches
ItemPackageDimensions_Length : 8 inches
ItemPackageDimensions_Width : 5 inches
ItemPackageQuantity : 1
ItemTypeKeyword : powerline-network-adapters
Manufacturer : ANMBEST
MaximumVoltage : 8 kilovolts
ModelName : Gen 3
ModelNumber : Gen 3
NumberOfItems : 1
NumberOfLayers : 1
NumberOfPins : 8
NumberOfPorts : 2
PartNumber : ANMBEST_MD602,603
Platform : not_machine_specific
PowerPlugType : no_plug
ProductDescription : Integrated with the third-generation Starlink router, Starlink Gen 3 offers enhanced Wi-Fi 6 capabilities and robust Ethernet connectivity, ensuring users enjoy reliable, high-speed internet across the globe, particularly for remote, rural, and mobile users. Use our IP68 Waterproof Starlink Ethernet Adapter, you can add any length Ethernet for the fastest speed with Starlink Mini and it's waterproof. The adapter is robust and comes with covers to put over the free Ethernet port when not in use.
Specifications:
Number of cores: 8 PIN
Waterproof rating: IP68
Connection type: RJ45 to GEN 3
Flame retardant rating: UL94V-0
Connection method: plug type + thread pressure lock
Case wall thickness: Threaded type: >2mm, through-hole type: 0.3~12mm
Transmission speed range: 1200Mbps
Electrical parameters:
Rated current: 2.4A
Rated voltage: 250VAC
Insulation resistance: ＞500MΩ
Compressive strength: AC1000V 50HZ or 60HZ for 1 minute
Contact resistance: ＜10mΩ
Material:
Shell: Nylon PA66 (UL94V-0)
Socket contact pin: 0.5mm diameter phosphor copper wire
Contact pin gold plating thickness: 6u inch
Waterproof rubber ring: silicone
Environmental conditions:
Working temperature: -40～120Celsius
Storage temperature: -25～85Celsius
Atmospheric pressure: 86～106kPa
Relative humidity: ≤90% RH
Package Included:
1x IP68 Waterproof Starlink Ethernet Adapter Gen 3/Mini
1x Waterproof/Dust Cap Cover
ProductSiteLaunchDate : 2024-11-18T01:41:28.635Z
RecommendedUsesForProduct : Networking
SpecificationMet : IEEE
SpecificUsesForProduct1 : TV
SpecificUsesForProduct2 : PC
SpecificUsesForProduct3 : Gaming
Style : 1PCS
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
SwitchType : Managed
UnitCount : 1
UnspscCode : 43220000
UpperTemperatureRating : 85 degrees_celsius
Voltage : 57 volts
WarrantyDescription : 1 Year