Cart 2 india

Specification
Brand : Fiberssky
BulletPoint1 : 【Non-PoE to PoE+】PoE splitter to split the PoE signal into 12V power supply and 10/100M Ethernet source in RJ45 so that non-PoE devices can be powered over Ethernet located up to 100 meters (328 ft.) away. It’s a perfect solution for devices that don't support PoE in a PoE environment.
BulletPoint2 : 【12V/1-2A & 10/100Mbps】Split POE signal in 12V DC power and 10/100Mbps Ethernet data; Output Power: 12V/1-2A, 15.4W(IEEE 802.3af), 25.5W(IEEE 802.3at). Plug Output: Data (1,2+/3,6-)
BulletPoint3 : 【Triple Protection】Support the isolation circuit protection, can effectively protect electrical equipment; Support the short circuit, overvoltage protection, 1500V high voltage isolation.
BulletPoint4 : 【Widely Application】Support international standard IEEE 802.3 I, IEEE 802.3 u, IEEE 802.3 x, IEEE 802.3 af, IEEE 802.3 at, compatible with DC voltage 44-57V standard POE switches. Plug and play, available with IP camera/phone, wireless AP and other 12V Non-POE devices for home, ffice, factory, mall, warehouse, etc.
BulletPoint5 : 【What You Get】2x Fiberssky Active POE Splitter, 30 Days Free-returned, 1 Year Free Warranty and Lifetime Technology Support. If you have any further questions or queries, please feel free to contact us.
Color : White
CompatibleDevices : Internet Protocol Camera
ConnectorType : Rj45, 5.5x2.1mm Dc Jack
DataLinkProtocol : IEEE 802.3
DataTransferRate : 100 megabits_per_second
ExternallyAssignedProductIdentifier1 : 616943814354
ExternallyAssignedProductIdentifier2 : 0616943814354
HardwareInterface : ethernet
ItemName : POE Splitter Adapter 12V, Active Power Over ethernet Splitter 48V to 12V, IEEE 802.3af/at Compliant 10/100Mbps up to 100 Meters for Surveillance Camera CCTV and Wireless AP, 2-Pack
ItemPackageDimensions_Height : 15.0114 centimeters
ItemPackageDimensions_Length : 3.2004 centimeters
ItemPackageDimensions_Width : 10.2108 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : powerline-network-adapters
Manufacturer : Fiberssky
ModelNumber : LS-POE-PD02A(2pcs)
PartNumber : LS-POE-PD02A(2pcs)
ProductDescription : The POE splitter can separate the power and data via cable transmission. Proper matching use with POE switch or PSE injector which meet standard IEEE802.3af, provides 12V power and 10/100M data at the same time for the terminal device does not support PoE so that non-PoE devices can be powered over Ethernet.

Specification:
1. Input: RJ45 female
2. Output: RJ45 male and 5.5x2.1mm male DC jack
3. Data rate: 10/100Mbps
4. Maximum Power: 15.4W(IEEE 802.3af), 25.5W(IEEE 802.3at)
5. Voltage input: 44-57V, overvoltage protection
6. Voltage output: PD101 12V
7. Current output: 1-2A
8. Maximum transmission distance: 100-Meter
9. Wire length: 205mm
10. Operating temperature: 0 Degree~50 Degree
11. Plug and play, no configuration required.

Applications:
1. Use with IEEE 802.3af standard power supply equipment (POE switch) and Non-POE device.
2. Unable to use with Non-POE switch or POE device.
3. It eliminates the need for a power supply or for a camera to be located near a power outlet.

Q&A
1-What is PoE?
Answer: Deliver power and data with a single Ethernet cable for fewer wall plugs and messed cables. Extend powerline to where no AC outlets are nearby, up to 300 feet away from the power source.
2- Why PoE to RJ45?
Answer: A cost-effective way to add plug-and-play PoE support to 12V powered devices and make full use of PoE switches.
3-What else needed?
Answer: You need an IEEE 802.3af compliant PoE switch or injector to serve as the PSE (Power Source Equipment) and an Ethernet cable with PoE signal to feed the splitter.
ProductSiteLaunchDate : 2022-09-20T20:38:04.090Z
Size : Normal Version
Style : 2x PoE Splitter
SupplierDeclaredDgHzRegulation : not_applicable
UnspscCode : 43202222
Voltage : 57 volts