Cart 2 india

Specification
AutoPartPosition : inside
AutoPartPosition1 : rear
AutoPartPosition2 : top
Brand : GOODELY
BulletPoint1 : Easy Installation & Compatibility: No installation instructions are needed. You can complete the installation by referring to the listing photos. Compatible with MT-09 / MT09 SP 2021 2022 2023 MT-10 MT10SP 2022 2023
BulletPoint2 : Brand-New Integrated LED Tail Light: Made with acrylic clear lens and ABS black cover, integrating brake light, running light, and turn signal functions. Lights for multi-scenario warning needs.
BulletPoint3 : Flexible Wiring & Resistor Adaptation: Includes two yellow turn signal wires for manual connection. If lights flash rapidly or fail, install an LED resistor (not included). Follows most bikes’ wiring logic (black negative/green brake/red running).
BulletPoint4 : Multi-Color Options & Design: Available in smoke/red/clear (note: 5% color variance from images may occur). enhancing rear visual distinction.
BulletPoint5 : Package & Notes: Includes 1 tail light turn signal. When using red connectors, follow the instruction diagram (see wiring guide) for secure connection.
Color : Smoke
Color1 : White
Color2 : Black
CompatibleWithVehicleType : Motorcycle
ExternallyAssignedProductIdentifier1 : 752790217129
ExternallyAssignedProductIdentifier2 : 0752790217129
FitType : Vehicle Specific
IsAssemblyRequired : 1
ItemName : LED Tail Brake Lights Turn Signal Integrated Compatible With YAMAHA MT-09 / MT09 SP 2021 2022 2023,MT-10 /MT10SP 2022 2023 (Smoke)
ItemPackageDimensions_Height : 33.5026 centimeters
ItemPackageDimensions_Length : 9.398 centimeters
ItemPackageDimensions_Width : 26.4922 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : powersports-tail-light-assemblies
Manufacturer : GDY--413-1
Material : Plastic
ModelName : 2411450
ModelNumber : GDY--413-1
ModelYear : 2021
NumberOfBoxes : 1
NumberOfItems : 1
OemEquivalentPartNumber : 2411450
PartNumber : GDY--413-1
ProductDescription :

Color:Smoke (Color may have 5% different from the photos shown online.)
Material: Acrylic clear len/ ABS black cover

Packing included:
A piece Tail Light Turn Signals.
Not include installation instructions,You can complete the installation by referring to the listing photos.


Wiring Diagram applicable to most bikes:
Black Wire(Negative),     Green Wire(Brake),     Red Wire(Running Light)
1. Connect one end of the resistor to the ground wire on your turn signal harness from your bike.
2. Connect the other end of the resistor to both the YELLOW wire from our taillight and the positive turn signal wire from your turn signal harness from your bike.
3. Repeat the same process for the other side.


To use the red connectors, place one wire inside along one channel, place another wire inside along  the other channel.
Push down the metal pin as it will make a small cut on each wire bridging the connectors.
if you are using the resistors, place one end of the resistor in the middle of either channel along with the one wire.
There are two yellow wires for turning signal, they need you link them manually. If the light twinkle quickly or don't work, you need to linked a LED resistance.


Fitment：
Compatible with MT-09 / MT09 SP 2021 2022 2023
Compatible with MT-10 MT10SP 2022 2023

Technical Support:
We value the shopping experience and satisfaction of each customer, so we provides technical support. No matter what the problem , Please let us know first, we will do our best to solve any problem for you

ProductSiteLaunchDate : 2022-04-13T08:02:46.676Z
Size : 2006-2013
SpecificUsesForProduct : Brake Lights
Style : off-road-motorcycles
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredDgHzRegulation1 : not_applicable
SupplierDeclaredDgHzRegulation2 : not_applicable
SupplierDeclaredDgHzRegulation3 : not_applicable
SupplierDeclaredDgHzRegulation4 : not_applicable
SupplierDeclaredDgHzRegulation5 : not_applicable
UnitCount : 1
UnspscCode : 25172900
Voltage : 12 volts
Wattage : 30 watts