Cart 2 india

Specification
AutoPartPosition : rear
Brand : CRU Products
BulletPoint1 : Specifically designed for the 2012 and up V-Rod Night Rod Special
BulletPoint2 : Plug-&-Play wiring harness with no cutting wires and no drilling holes
BulletPoint3 : Pre-assembled kit with easy bolt-on installation
BulletPoint4 : Dual Color Integrated light bar functions as red running & brake with amber turn signals; Lifetime warranty against LED failure
BulletPoint5 : Choose Clear or Smoked Tubing/Lens; Each version can be purchased with or without the new license plate mount
BulletPoint6 : Package Included:1x Set Lights (Left and right lamp and quick-disconnect wiring harness)
Color : Red
CompatibilityOptions : HONDA 14-20 GROM/MSX125,14-18 CBR650F,16-20 NC700/750
CompatibleWithVehicleType : ATV
ExteriorFinish : White
ExternallyAssignedProductIdentifier1 : 0705464578651
ExternallyAssignedProductIdentifier2 : 705464578651
FitType : Vehicle Specific
ItemName : OEM Suzuki 03-04 LTZ 400 Quadsport Z400 Rear Combination Taillight Light Lamp
ItemPackageDimensions_Height : 10.25 inches
ItemPackageDimensions_Length : 6.5 inches
ItemPackageDimensions_Width : 4.5 inches
ItemPackageQuantity : 1
ItemShape : Square
ItemTypeKeyword : powersports-tail-light-assemblies
Manufacturer : Chrome Glow
Material : Zinc Alloy, PC
Material1 : Silicone
Material2 : Rubber
ModelName : Saddlebag Led Inserts Support Auxiliary Light
ModelNumber : 8542076208
ModelYear : 2022
MountingType : Plug in
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : 35710-03g20, 35710-03g00, 23025-s004
ProductDescription : Get that custom, stealth turn signal look for your 2012-up Harley-Davidson V-Rod Night Rod Special with this sleek under the tail turn signal & brake kit. All new design - now Plug-&-Play so no cutting or splicing of wires required. This is an all-in-one, under the fender LED Light Bar kit that was specifically designed for the 2012-up V-Rod that has the stock taillight that extends all the way down to the fender edge. It functions as Running light, Brake light, and Turn Signals. This unique LED Light Bar for the newer V-Rod Night Rod Special features a Red 1/2 intensity running light and full intensity brake light across the full length of the strip. Then when either turn signal is applied that side LEDs will blink in Amber starting at the outermost edge of the stock taillight.

Fits: 2012 and up V-Rod Night Rod Special

Features:

- Specifically designed for the 2012 and up V-Rod Night Rod (NOT Muscle)
- Allows for complete removal of stock rear turns and bulky tag mount
- Pre-assembled kit with easy bolt-on installation
- Plug-&-Play wiring harness with no cutting wires and no drilling holes
- Choose with or without under the fender Tag Mount (you would choose without if you have a side-mount for your license plate)
- Tag Mount comes with white LED light for your plate
- 95 red LEDs function as running & brake
- 40 amber LEDs (per side) function as turn signals
- 120 degree viewing angle for wider visibility
- Choose clear or smoked lens color
- LED turn signals start from outer edge of stock tail for a matching look

Note: A Signal Stabilizer or Load Equalizer will be required to slow turn signal flash rate and remove error codes when switching from stock to LED turn signals

**These products are not DOT approved.
ProductSiteLaunchDate : 2017-04-13T17:49:54.951Z
Size : No Tag Mount
SpecificUsesForProduct : Taillight
SpecificUsesForProduct1 : Rear Lights
SpecificUsesForProduct2 : Brake Lights
Style : Custom
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredDgHzRegulation1 : not_applicable
SupplierDeclaredDgHzRegulation2 : not_applicable
SupplierDeclaredDgHzRegulation3 : not_applicable
SupplierDeclaredDgHzRegulation4 : not_applicable
SupplierDeclaredDgHzRegulation5 : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 2
UnspscCode : 25172900
Voltage : 12 volts_of_direct_current
Wattage : 30 watts