Cart 2 india

Specification
AutoPartPosition : rear
Brand : TOPZONE
BulletPoint1 : Fit Triumph 2006-2013 Daytona 675; 2011 Daytona SE;2011-2013 Daytona 675 R; 2008-2012 Street Triple 675
BulletPoint2 : Fit Triumph 2009-2012 Street Triple R; 2011-2012 Sprint GT, 2009-2010 Speed Triple
BulletPoint3 : Packing: 1 PCS of taillight + 1 bag of resistors and other accessories
BulletPoint4 : Running light / position light : red color; Stop light / brake light : red color more powerful when you are braking
BulletPoint5 : Integrated turn signals indicators : amber color on each half of the taillight (wires are independent)
BulletPoint6 : For Clear Color Lamp, Search B01MZ8ZTKL
Color : Smoke
CompatibleWithVehicleType : Motorcycle
ExteriorFinish : Polished
ExternallyAssignedProductIdentifier1 : 815726028722
ExternallyAssignedProductIdentifier2 : 0815726028722
FitType : Vehicle Specific
IncludedComponents : RESISTORS INCLUDED
IsAssemblyRequired : 1
ItemName : TOPZONE LED Brake Taillight Integrated Turn Signal For Triumph 2005-2011 Street Triple 675, 2008-2010 Speed Triple, Speed Triple R(Smoke Color)
ItemPackageDimensions_Height : 8 inches
ItemPackageDimensions_Length : 14 inches
ItemPackageDimensions_Width : 10 inches
ItemPackageQuantity : 1
ItemTypeKeyword : powersports-tail-light-assemblies
Manufacturer : dingdong
ModelName : Manufacturer Part Number
ModelNumber : TZT-194-FF
NumberOfItems : 1
PartNumber : TZT-194-INT-S-TL
ProductDescription : TOPZONE LED Brake Taillight Integrated Turn Signal For
Triumph
2006-2013 Daytona 675;
2011 Daytona SE;
2011-2013 Daytona 675 R;
2008-2012 Street Triple 675,
2009-2012 Street Triple R;
2011-2012 Sprint GT,
2009-2010 Speed Triple



Running light / position light : red color
Stop light / brake light : red color more powerful when you are braking
Integrated turn signals indicators : amber color on each half of the taillight (wires are independent)
To slow down the blinking rate use provided resistors if necessary:

Wiring Diagram applicable to most bikes:
Black Wire(Negative),
Green Wire(Brake)
Red Wire(Running Light)
1. Connect one end of the resistor to the ground wire on your turn signal harness from your bike.
2. Connect the other end of the resistor to both the YELLOW wire from our taillight and the positive
turn signal wire from your turn signal harness from your bike.
3. Repeat the same process for the other side. To use the red connectors, place one wire inside along one channel, place another wire inside along the other channel. Push down the metal pin as it will make a small cut on each wire bridging the connectors.
if you are using the resistors, place one end of the resistor in the middle of either channel along with the one wire.

Quality Guarantee： return and full re-fund if any quality issues.
Our service: 7 days/ 24hours service available. Most emails can be replied within 24 hours including weekends and holidays.
( Due to different time zone, some maybe delayed).

ProductSiteLaunchDate : 2017-01-12T08:46:20.708Z
SpecificUsesForProduct1 : Brake Lights
SpecificUsesForProduct2 : Rear Lights
SupplierDeclaredDgHzRegulation : not_applicable
UnspscCode : 25172900
Voltage : 12 volts
WarrantyDescription : 1 YEAR MANUFACTURER