Cart 2 india

Specification
Brand : YPA MICROPHONES
BulletPoint : Industrial Power Supply
BulletPoint1 : To connect a Lectrosonics TA5F microphone to an XLR input, you need a special adapter that converts the TA5F connector (used on Lectrosonics wireless transmitters) to a standard 3-pin XLR male connector
BulletPoint2 : Essentially, one end of the adapter will be plugged into the TA5F mic, and the other end will plug directly into an XLR input on your recording device Recorder, PA, Mixer, Interface, or camera. And Turn 48v Phantom power switch on.
BulletPoint3 : Compatible with Lectrosonics lavalier or headset mic with a ta5f connector, and also compatible with other brand mic with a ta5f connector.
BulletPoint4 : Internal Circuit for a true-balanced output with low impedance.
BulletPoint5 : Impedance 75 Ohm
BulletPoint6 : Flatness ±2.0 dB
Color : Black
ExternallyAssignedProductIdentifier : 4861165976625
ExternallyAssignedProductIdentifier1 : 0681573866776
ExternallyAssignedProductIdentifier2 : 681573866776
FormFactor : Ultra Mini
GpsrSafetyAttestation : 1
Hazmat1 : LITHIUM ION BATTERIES CONTAINED IN EQUIPMENT
Hazmat10 : DE_SmallLithiumIonBatteryInEquipment
Hazmat11 : EG_SmallLithiumIonBatteryInEquipment
Hazmat12 : ES_SmallLithiumIonBatteryInEquipment
Hazmat13 : FR_SmallLithiumIonBatteryInEquipment
Hazmat14 : GB_SmallLithiumIonBatteryInEquipment
Hazmat15 : IE_SmallLithiumIonBatteryInEquipment
Hazmat16 : IN_SmallLithiumIonBatteryInEquipment
Hazmat17 : IT_SmallLithiumIonBatteryInEquipment
Hazmat18 : JP_SmallLithiumIonBatteryInEquipment
Hazmat19 : MX_SmallLithiumIonBatteryInEquipment
Hazmat2 : UN3481
Hazmat20 : NL_SmallLithiumIonBatteryInEquipment
Hazmat21 : PL_SmallLithiumIonBatteryInEquipment
Hazmat22 : SA_SmallLithiumIonBatteryInEquipment
Hazmat23 : SE_SmallLithiumIonBatteryInEquipment
Hazmat24 : SG_SmallLithiumIonBatteryInEquipment
Hazmat25 : TR_SmallLithiumIonBatteryInEquipment
Hazmat26 : US_SmallLithiumIonBatteryInEquipment
Hazmat27 : ZA_SmallLithiumIonBatteryInEquipment
Hazmat28 : 9
Hazmat3 : II
Hazmat4 : AE_SmallLithiumIonBatteryInEquipment
Hazmat5 : AU_SmallLithiumIonBatteryInEquipment
Hazmat6 : BE_SmallLithiumIonBatteryInEquipment
Hazmat7 : BR_SmallLithiumIonBatteryInEquipment
Hazmat8 : CA_SmallLithiumIonBatteryInEquipment
Hazmat9 : CN_SmallLithiumIonBatteryInEquipment
Impedance : 75 ohm
ItemName : YPA EM5L Electret Microphone Preamp Adapter for Lectrosonics TA5F mic to XLR
ItemPackageDimensions_Height : 1.06 inches
ItemPackageDimensions_Length : 4.33 inches
ItemPackageDimensions_Width : 2.76 inches
ItemPackageQuantity : 1
ItemTypeKeyword : microphone-preamps
Manufacturer : YPA Microphones INC
Material1 : Aluminum
Material2 : Metal
ModelName : 500712993A1
ModelNumber : YPA EM5L
NumberOfBoxes : 1
NumberOfItems : 1
OutputVoltage : 4 volts_of_direct_current
PackageLevel : unit
PartNumber : Dyocoagv17mi0g9gt
ProductDescription : The YPA EM5L is a male TA5M mini-xlr to male XLR3M adapter for connecting Lavalier or Headset condenser microphones with a TA5F output to devices with an XLR input. It utilizes an internal pcb to convert an unbalanced signal to a balanced signal, making it ideal for connecting a microphone with an unbalanced output to PA, Recorder, Camera, mixer or interface. Premium componentry ensures extremely low impedance and low noise when a long cable run is necessary. Allowing microphones such as the Lapel Mic and Head worn Mic to receive power from XLR devices and it features a locking connector that will ensure your connection is always secure when recording. This converter will operate with any mic that has a TA5 connector wired for Lectrosonics transmitters. It dose not provide power, that this converter is powered by 48 volt phantom power from the XLR side (mic input to mixer or recorder). The converter provides power of about 2 to 4 volts to the lav mic just like the Lectro transmitter normally does. If you are looking for a hard wired lav mic and had hoped that somehow You could use your existing COS 11 mics which are wired for Lectro transmitters. I recommend this device. Now when hard wired is a better option You can just plug your lav onto this device and am ready to go. No need for separate mic with its own power supply. Note: needs +48v power. Overall very pleased to have this in your kit! Adapter Type Converts phantom 48 V to electret 2 to 4V power Connectors 5-pin TA5M to 3-pin XLR male Length 2.1" (53 mm) approx. Diameter 0.8" (20mm) approx. Weight 2.05 oz (58 g) approx. Package Weight 0.1 lb Box Dimensions (LxWxH) 5 x 3.3 x 1.8"
ProductSiteLaunchDate : 2024-10-11T08:40:06.763Z
Size : EPP-300-27
StreetDate : 2024-03-01T00:00:01Z
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnspscCode : 52161600
WarrantyDescription : 1 Year Manufacturer