Cart 2 india

Specification
Brand : NJBVRS
BulletPoint1 : Temperature adjustable, Product temperature is uniform, water circulation cooling
BulletPoint2 : Portable , Light and practical. Space-saving, hot bending of plastic sheets of various materials, such as thickness more than 6 mm
BulletPoint3 : Can be heated up and down simultaneously by two heaters and can be combined with multiple heaters to heat multiple bending points at one time
BulletPoint4 : If bending thick plates, slotting bending, bending angle will be more beautiful, you can adapt to local conditions, flexible use. Can be combined with the worktable into a hot bending machine, can also be used alone
BulletPoint5 : Power supply and water pipe are connected at both ends respectively. Hydro-power separation is safe and intuitive, easy to and pull, convenient to collect, and easy to assemble with the workbench.There is water circulation cooling on both sides of the heating tube to ensure that there will be no thermal deformation except where heating is needed
Color : 60cm
ExternallyAssignedProductIdentifier : 7503019828038
IncludedComponents1 : Angle Grinder Adapter
IncludedComponents2 : Sanding Belts
IncludedComponents3 : Allen Wrenches
IncludedComponents4 : Mounting Hardware
ItemName : Acrylic Heat Bending Machine 30cm/60cm Acrylic Bending Machine Organic Plates Advertising Bender For Plastic PVC Board, Acrylic Bender Acrylic Plastic PVC(60cm)
ItemPackageDimensions_Height : 20 centimeters
ItemPackageDimensions_Length : 65 centimeters
ItemPackageDimensions_Width : 20 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : power-press-brakes
Manufacturer : NJBVRS
MaximumCurrent : 1 amps
ModelName : 249928690
ModelNumber : 249928690
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : 249928690
PowerSourceType : Manual
ProductDescription : Acrylic is one of the more commonly used plastic sheets on the market, so people call the equipment that bends acrylic acrylic bending machines; in principle, but in terms of the bending principle of acrylic and other plastic sheets, it is It is formed by heating and softening the plate and then bending it, so it is also called an acrylic hot bending machine. The above naming basis is relatively simple and is limited to one material: because acrylic plate is a type of plastic plate, it should be collectively called plastic plate hot bending machine or plastic plate bending machine.

Product parameters:
Effective heating width: 300mm/600mm
Power: 800W

Instructions
It is easy to operate and has both automatic and manual functions. In the automatic state, after the plate is placed, it will automatically bend and form within the preset time.
The softening gap can be adjusted arbitrarily according to the thickness of the processed plate.
The plate is fixedly heated to reduce deformation after forming.
The angle setting is convenient and accurate through the handwheel, and the configuration relies on the ruler to ensure the uniformity of batch products.
The use of infrared heating method greatly extends the service life compared with the furnace wire heating method.
The working voltage is adjustable, thus avoiding the phenomenon of paste when folding thick plates.
Equipped with a water circulation system and a water temperature overheating alarm system to ensure the safe use of the equipment
Leakage protection function and safe use with grounding wire
It is suitable for a variety of industries and can fold acrylic, PVC and other materials.
ProductSiteLaunchDate : 2025-02-27T05:19:30.371Z
Size : A
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 27000000