Cart 2 india

Specification
Brand : Super Dental
BulletPoint : Filler
BulletPoint1 : Easy to operate, saving time, casting success rate, ordinary tooth box can also be injection molded.
BulletPoint2 : The machine adopts international standards, at the local hardware store parts can be equipped to facilitate your maintenance.
BulletPoint3 : with the operating instructions, heating ring and other accessories, it is the preferred instrument factory, clinics improve the efficiency and quality.
BulletPoint4 : The machine adopts international standards, at the local hardware store parts can be equipped to facilitate your maintenance.
BulletPoint5 : The Unit Consists of a Heater and a Hot Press. Heaters: Temperature Control, Timers and Electrical Systems. Hot Presses: Frames, Cylinders, Heaters, Brackets and Flasks.
ExternallyAssignedProductIdentifier1 : 0758358736897
ExternallyAssignedProductIdentifier2 : 758358736897
ExternallyAssignedProductIdentifier3 : 849194007781
ExternallyAssignedProductIdentifier4 : 001910618408
FdaDeviceClassification : iv
FdaIndicationOfUse : otc
FdaInstructionsForUseType : consumer
FdaLabelType : consumer
IncludedComponents : Vacuum Former
ItemName : Super Dental 400W Electric Digital Display Lab Flexible Injection System Invisible Denture Molding Machine
ItemPackageDimensions_Height : 46.736 centimeters
ItemPackageDimensions_Length : 24.384 centimeters
ItemPackageDimensions_Width : 37.592 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : professional-dental-presses
Manufacturer : Superdental
Material : 120V AC
ModelNumber : 622-VL514
NumberOfBoxes : 1
NumberOfItems : 7
PackageLevel : unit
PartNumber : superdental
ProductDescription : Specfication:  Voltage: AC220V50Hz, 110V 60hz  Power consumption: 400W  Size: 73 * 29 * 37cm  Weight: 45KG  Parts Included  The main body frame *1 A temperature control device *1  Heating furnace *1  Heating barrel* 1  Unloading a barrel*1  Pick a material rod*1  injector rod f*1  denture box * 1  Four pillar clip board *1  Type box wrench *1  Thermocouple wire* 1  Power cord* 1 Steps: 1. the Function of the Heater Is to Heat the Ink Cartridge at a Temperature of 282-288 C for About 7 Minutes 30 Seconds - 11 Minutes to Melt the Flexible Denture Material in the Ink Cartridge. 2.the Function of the Hot Press Is to Inject Molten Material into a Previously Prepared Flask. 3. the Heater Will Beep When It Is Heated. Note: Please Read the Product Manual Carefully Before Operating the Machine.
ProductSiteLaunchDate : 2022-09-20T01:26:27.885Z
SupplierDeclaredDgHzRegulation : not_applicable
TemperatureRating : Ambient: 15 to 25 C (59 to 77 F)
UnitCount : 1
UnspscCode : 41000000