Cart 2 india

Specification
Brand : Walfront
BulletPoint1 : Ample Power Output: With a large output current of 4a continuous and 6a maximum, this ubec ensures a stable power supply for all your devices
BulletPoint2 : Enhanced Safety: Featuring against input polarity reversal, this ubec ensures your device is from damage. the working status indicator light normal operatio
BulletPoint3 : Efficient Power Supply: The rc ubec can deliver a stable output current of up to 4a from an input of 7 to 25.5v, good for powering receivers, gyroscopes, and servos on rc helicopters
BulletPoint4 : Overload Protection: Utilizing a synchronous rectification switch power control chip, this ubec provides over current and over temperature protections, achieving an impressive 93% efficiency
BulletPoint5 : Minimize Interference: Equipped with an anti-interference loop, this ubec greatly reduces electromagnetic interference, guaranteeing smooth operations for your receiver
Color : As Shown
ExternallyAssignedProductIdentifier : 9582728811591
IncludedComponents : Pipe Pressure Regulator
ItemDisplayDimensions_Length : 3.54 inches
ItemDisplayWeight : 1.08 pounds
ItemName : Voltage Stabilizer RC UBEC Input 7-25.5V 2-6S Lipo 6-16 Cell NiMh NiCd Output 5V 6V 7.4V 4A Maximum 6A Switch Mode BEC for RC Helicopter
ItemPackageDimensions_Height : 1 centimeters
ItemPackageDimensions_Length : 12 centimeters
ItemPackageDimensions_Width : 8 centimeters
ItemTypeKeyword : pressure-regulators
Manufacturer : WALFRONT
Material : Brass
ModelName : WALFRONTtbzgxpq467
ModelNumber : WALFRONTtbzgxpq467
NumberOfLithiumMetalCells : 1
PartNumber : WALFRONTtbzgxpq467
ProductDescription : 1. [7 to 25.5V Input] This UBEC can obtain DC voltage from an input of 7 to 25.5V and provide a stable output current of up to 4A to power devices such as receivers, gyroscopes, and multiple servos.
2. [Efficient Design] Utilizes synchronous rectification switch power control chip with over current and over temperature protections, achieving up to 93% efficiency.
3. [Large Output Current] This UBEC offers large output current of 4A continuous and 6A maximum, ensuring sufficient power supply for devices.
4. [Anti Interference] The output line is equipped with anti interference loop, which greatly reduces electromagnetic interference and ensures the normal operations of the receiver.
5. [Safety Feature] With the function of preventing input polarity reversal, and incorrect input power polarity will not damage the device; Equipped with working status indicator light, which lights up when the output is normal.
6. [Practical Tool] With this device, you can directly obtain the power required by the receiver from the power source without having to equip a separate receiver battery pack.

Spec:
Item Type: RC UBEC
Material: PCB
Output: 5.0V 4A or 6.0V 4A or 7.4V 4A (may switch through jumper cap), maximum output current: 6A (duration not exceeding 15 seconds)
Input: 7-25.5V (2-6S lipo or 6-16 cell NiMh NiCd battery pack)
Voltage Fluctuation: Less than 45mVp-p (at 2A 12V)
Size: Approx. 37x20x5.8mm / 1.46x0.79x0.23in

How to Use:
Take out the product, install and use.

packing list:
1 x RC UBEC
1 x Instruction Manual
ProductSiteLaunchDate : 2024-11-10T17:16:25.181Z
Size : 9*6.5cm
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 26111700