Cart 2 india

Specification
Brand : Raspberry Pi
BulletPoint1 : Part Number: BMP388 Barometric Pressure Sensor
BulletPoint2 : This is a 24-bit high precision barometric pressure sensor, which allows accurate altitude tracing, as well as barometric pressure / temperature measuring. It supports both I2C and SPI interfaces, also is compatible with 3.3V/5V voltage levels.
BulletPoint3 : Due to its ultra small form factor, low power consumption, low noise and high precision, the BMP388 Barometric Pressure Sensor is suited for applications such as accurate altimeter, environment monitoring, and IoT projects, and so on.
BulletPoint4 : Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32)
BulletPoint5 : Analog output, relative pressure, liquids and gases
CompatibleDevices : Raspberry Pi, Arduino, STM32
CompatibleProcessorTypes : Arduino
ExternallyAssignedProductIdentifier : 7430988326855
ExternallyAssignedProductIdentifier1 : 674043393544
ExternallyAssignedProductIdentifier2 : 0674043393544
IncludedComponents : Other
ItemName : BMP388 Barometric Pressure Sensor 24-bit High Precision Altimeter Altitude Temperature Measuring I2C/SPI Interface 3.3V/5V for Raspberry Pi @XYGStudy
ItemPackageDimensions_Height : 11.1 centimeters
ItemPackageDimensions_Length : 2.2 centimeters
ItemPackageDimensions_Width : 5.1 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : electronic-pressure-sensors
Manufacturer : XYG-Module
Material : Copper
MeasuringRange : 0 - 100 PSI
MemorySlotsAvailable : 1
ModelName : BMP388
ModelNumber : BMP388
MountingType : Flange Mount
NumberOfItems : 1
NumberOfPorts : 1
OutputType : Push-Pull
PartNumber : PX9111
Platform : not_machine_specific
ProductDescription :
Overview
This is a 24-bit high precision barometric pressure sensor, which allows accurate altitude tracing, as well as barometric pressure / temperature measuring. It supports both I2C and SPI interfaces, also is compatible with 3.3V/5V voltage levels.
Due to its ultra small form factor, low power consumption, low noise and high precision, the BMP388 Barometric Pressure Sensor is suited for applications such as accurate altimeter, environment monitoring, and IoT projects, and so on.

Features
Supports I2C (default) / SPI interface
Onboard voltage level translator, compatible with 3.3V/5V operating voltage
Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32)

Specifications
Operating voltage: 3.3V/5V
Communication interface: I2C/SPI
Barometric pressure operation range: 300~1250hPa
Barometric pressure absolute accuracy: ±0.40hPa (@900~1100hPa, 25~40℃)
Barometric pressure relative accuracy: ±0.08hPa (@900~1100hPa, 25~40℃)
Temperature coefficient offset: ±0.75Pa/K (@700~1100hPa, -20~65℃)）
Temperature absolute accuracy: ±0.5℃ (0~65℃）
Possible resolution: 0.016Pa (high precision mode)
Possible sampling rate: 200Hz
Operating voltage: -40~85℃
Dimension: 32mm × 20mm
Mounting hole size: 2.0mm

Package Contains (Weight: 0.018 kg)
BMP388 Barometric Pressure Sensor x1
PH2.0 5PIN wire x1

For more resources you may need, pls contact me via Amazon message, i will send you then via attachment.
ProductSiteLaunchDate : 2013-05-29T07:00:00.000Z
SpecificUsesForProduct : Engine
SupplierDeclaredDgHzRegulation : not_applicable
SystemBusStandardSupported : SATA 2
UnitCount : 1
UnspscCode : 46171600
Voltage : 5 volts