Cart 2 india

Specification
Brand : JTLB
BulletPoint1 : It's an advance pressure transducer than traditional mechanical pressure transducer
BulletPoint2 : ±2%FS small output error, including nonlinear, hysteresis error and repeatability, full temperature range
BulletPoint3 : Light weight and small size, convenient to install and operate
BulletPoint4 : It has complete voltage function
BulletPoint5 : Works for oil, fuel, , gas, water, air pressure, can be used in oil , gas , etc
ConnectivityProtocol : X-10
ExternallyAssignedProductIdentifier1 : 0686064595036
ExternallyAssignedProductIdentifier2 : 686064595036
FinishType : Finish
IncludedComponents : inc
InternationalProtectionRating : IP00
ItemName : JTLB 1/8NPT Thread Stainless Steel Pressure Transducer Sender Sensor for Oil Fuel Air Water (100PSI)
ItemPackageDimensions_Height : 2 centimeters
ItemPackageDimensions_Length : 14 centimeters
ItemPackageDimensions_Width : 10 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : electronic-pressure-sensors
Manufacturer : JTLB
Material : mixture
ModelName : JTLB254gyzpamo-02
ModelNumber : JTLB254gyzpamo-02
MountingType : Surface Mount
NumberOfItems : 1
PartNumber : JTLB254gyzpamo-02
PowerSourceType : PowerSource
ProductDescription : Load Resistance: ?(supply power-6.5V/0.02A)?
Long-term Stability: Less than 0.1%FS/year
Temperature Effect on Zero: Typical:0.02%FS/?; Maximum:0.05%FS/?
Temperature Effect on Sensitivity: Typical: 0.02%FS/?; Maximum: 0.05%FS/?
Shock Resistance: 1000g
Anti-Shock: ?+/-0.01%FS(X,Y,Z axes, 200Hz/g)
Response Time: ?1ms
Insulation Resistance: >100m? 500VDC
Explosion-proof Class: ExiaTTCT6
Electromagnetism Compatibility: EN50051-1
200 psi
Input: 0-200 psi
Output: 0.5V~4.5V linear voltage output. 0 psi outputs 0.5V, 100 psi outputs 2.5V, and 200 psi outputs 4.5V
Working Temperature: -40~+125?
Accuracy: ±1%FS
Thread: 1/8-27 NPT
Overload Capacity: 2 times of rated pressure
Pressure Medium: Oil, gas and water which is compatible with 316L stainless steel
Load Resistance: ?(supply power-6.5V/0.02A)?
Long-term Stability: ± 0.2%FS/year
Temperature Effect on Zero: Typical: ±0.02%FS/?; Maximum: ±0.05%FS/?
Temperature Effect on Sensitivity: Typical: ±0.02%FS/?; Maximum: ±0.05%FS/?
Shock Resistance: 100g
Anti-Shock: ?±0.01%FS(X,Y,Z axes, 200Hz/g)
Response Time: ?1ms
Insulation Resistance: >100m? 500VDC
Explosion-proof Class: ExiaTTCT6
Electromagnetism Compatibility: EN50081-1; EN50082-2; IEC6 1000-4-3
Wiring Connector: Water sealed quick disconnect. Mating connector and wire harness (pigtail) is included.
Wiring: Red for IN+; Black for GND; Green for OUT.
300 psi
Input: 0-300 psi
Output: 0.5-4.5V linear voltage output. 0 psi outputs 0.5V, 150 psi outputs 2.5V, 300 psi outputs 4.5V
Accuracy: +/-0.5%FS
Thread: 1/8 NPT
Wiring: Red: +5V; Black: ground; Green: output
Overload Capacity: 2-4 times of rated pressure
Working Temperature: -40~+120?
Compensation Temperature: 0?~+80?
Class: IP67
Pressure Medium: Oil, gas and water which is compatible with 316L stainless
ProductSiteLaunchDate : 2024-03-14T11:17:27.136Z
Size : 100PSI
SupplierDeclaredDgHzRegulation : not_applicable
SwitchType : Pressure Switch
UnitCount : 1
Voltage : 1 volts