Cart 2 india

Specification
Brand : Supco
BulletPoint : The 20P-F-100 Pressure Swichgage is a 2" dial, diaphragm-actuated pressure-indicating gage with a built-in electrical limit switch, which is used for tripping alarms and/or shutdown devices. The 20P-F-100 also has an "FS" stud for closed loop w/ 518 tattletale. This dual-scale instrument has a range of 0-100 psi (690 kPa) [7.0 bar]. This popular instrument features a beryllium copper diaphragm, a 1/8-27 NPTM brass process connection, and exceeds SAE standards.
BulletPoint1 : Supco Part number SHP550450
BulletPoint2 : Open: 550 PSI Close: 450 PSI
BulletPoint3 : High pressure switch opens on pressure rise
CircuitType : 1-way
Color : Green
ConnectivityProtocol : X-10
ConnectorType : Screw
ControlMethod : touch
ExternallyAssignedProductIdentifier1 : 687152220304
ExternallyAssignedProductIdentifier2 : 0687152220304
InternationalProtectionRating : IP20
ItemName : Supco High Pressure Switch, Open: 550 PSI, Close: 450 PSI, Fixed Actuator, Automatic Operation, Green
ItemPackageDimensions_Height : 1.5 inches
ItemPackageDimensions_Length : 5.25 inches
ItemPackageDimensions_Width : 3.25 inches
ItemPackageQuantity : 1
ItemTypeKeyword : electronic-pressure-switches
Manufacturer : Supco
Material : Stainless Steel
Material1 : Stainless Steel
Material2 : Beryllium Copper
Material3 : Alloy Steel
Material4 : PC
Material5 : Brass
ModelNumber : SHP550450
MountingType : Panel Mount or PCB Mount
NumberOfItems : 1
NumberOfPositions : 2
OperatingVoltage : 24 volts
OperationMode : automatic
PartNumber : SHP550450
ProductDescription : Supco Part number SHP550450 Open: 550 PSI Close: 450 PSIHigh pressure switch opens on pressure rise High precision controls at economical prices. Encapsulated, non-adjustable, single pole - single throw, direct mount switches for use with HFC, HCFC, and CFC refrigerants Features: ¼" SAE 45 female flare fitting with valve core depressor High pressure switch opens on pressure rise Life at rated load: 100,000 cycles Automatic Reset Rated Voltage 24/120/240 VAC @ 50/60 Hz Snap acting stainless steel hermetically sealed sensor Wire is 18 AWG, 18" long Small size and light weight for direct mounting Excellent set point repeatability/stability Specifications: -31F to 149F (-35C to 65C) UL Recognized, CE Max Pressure 700PSI
ProductSiteLaunchDate : 2024-05-10T21:04:24.923Z
SpecificationMet : UL
SupplierDeclaredDgHzRegulation : not_applicable
SwitchType : Single Pole - Single Throw
TerminalType : Screw
UnitCount : 1
UnspscCode : 39122200
UpperTemperatureRating : 149 degrees_fahrenheit