Cart 2 india

Specification
AdditionalPrinterFunctions : print_only
Brand : wolovo
BulletPoint : Manufacturer part number X411000410
BulletPoint1 : Knifepoint is made from ultrafine grain size Zhuzhou cemented carbide.
BulletPoint2 : Higher hardness, greater strength, good abrasion resistance and good durability;
BulletPoint3 : Good sharpness, will not damage your material;
BulletPoint4 : The cutting speed is extremely quick with extra long life.
BulletPoint5 : Used for: It can be used in clothing proof press and ordinary graphtec plotter.
Color : Yellow
CompatibleDevices : PC
ConnectivityTechnology : USB
Duplex : Simplex
ExternallyAssignedProductIdentifier1 : 0699973950308
ExternallyAssignedProductIdentifier2 : 699973950308
HardwareInterface : usb
IncludedComponents : Blade Holder, Cutting Plotter Blades
ItemName : CB09 CB09U Graphtec Blade Holder with 15pcs Vinyl Cutter Plotter Cutting Blades 30/45/ 60 Degree
ItemPackageDimensions_Height : 8 inches
ItemPackageDimensions_Length : 12 inches
ItemPackageDimensions_Width : 4 inches
ItemPackageQuantity : 1
ItemTypeKeyword : printer-cutters
Manufacturer : wolovo
ModelNumber : LYSB01N3PWUJ2-CMPTRACCS
ModelSeries : Roland
NumberOfItems : 1
PartNumber : 2100
PrinterOutput : Monochrome
ProductDescription :
Specifications:
Material: hard alloy
Diameter(Outer): approx.11.5mm/0.45"
Diameter(Inner ): approx.1.5mm/0.059"
Length(Clamp to down): approx.33mm/1.29"
Length of holder: 51.8mm

Package Include:
1*Blade holder
5*30 Degree Blades
5*45 Degree Blades
5*60 Degree Blades

Suitable for:
Plotter cutter.

Notice:
Blade should not extend too long,generally within half a millimeter is better, while paying attention to extended balde longer properly when carve the small print, in order to avoid the blade holder take the carved strokes away. Suitably engraved small print with new cutter and slow down.
When the word carved with angular phenomenon,you should change the blade to eliminate the problem,if the phenomenon persists after change blade, it should be the holder problem.
When problem arise the blade holder,try a drop of oil in the bearing and rotate the blade several times to lubricate, if still unresolved, consider replacing the blade holder.


ProductSiteLaunchDate : 2019-05-17T07:00:00.000Z
SpecificUsesForProduct : Vinyl Cutting
SupplierDeclaredDgHzRegulation : not_applicable
UnspscCode : 44000000
WarrantyType : limited warranty