Cart 2 india

Specification
Brand : YJYGR
BulletPoint1 : This electronic load uses original IR power tube and double high-speed ball bearing fan, with big fin heat sink, which is not afraid of dust and can guarantee the stability for a long time use, power redundancy is no less than 50% (25℃).
BulletPoint2 : Classical digital tube display, intuitive and durable, compared to LCD, it is more resistant to high temperature.
BulletPoint3 : It can display voltage and current when discharging constant current, visually reflecting the discharge conditions.
BulletPoint4 : Voltage and current wiring connectors are separated, with appropriate connection, it can eliminate the influence of wire resistance to voltage.
BulletPoint5 : 100% power burn-in in factory, suitable for assembly of power adapter fully-automatic burn-in cabinet.
CurrentRating : 10 amps
ExternallyAssignedProductIdentifier : 8691415899642
ItemName : YJYGR Electronic Load, 12V 250W 0-20A Discharge Board Burn-in Module for Battery Capacity Tester
ItemPackageQuantity : 1
ItemTypeKeyword : printer-memory
Manufacturer : YJYGR
Material : Silica Gel
MaximumSwitchingCurrent : 10 amps
MaximumSwitchingVoltage : 40 volts
MeasurementSystem1 : Imperial
MeasurementSystem2 : Metric
NumberOfItems : 1
OperationMode : Automatic
PartNumber : 652573979
PowerSourceType : Battery Powered
ProductDescription : Specifications:

Power Supply Voltage: DC12V(±5%) (equipment supply voltage)

Maximum Load Voltage: 100V

Constant Current Discharge Adjusting Range: 0-20A

Work Mode: Constant current mode (CC)

Maximum Discharge Current Error: 0.7%-0.01A

Maximum Discharge Power: 250W

Size: 13*9*11.5cm/5.1*3.5*4.5in

Weight: 879g(approx.)

Instruction:

1. Connect to 12V power supply then power on to electronic load mode. Make sure it is at stop condition (knob clockwise is minimum) then connect the tested power supply to the input power port, pay attention to the polarity.

2. Rotate knob to set constant current.

Note:

Since it works openly, there is no voltage and power limitation, but normal work should be below 100V, 250W.

Package Includes:

1 x Electronic Load
ProductSiteLaunchDate : 2021-08-31T02:19:17.871Z
Style : Portable
UnspscCode : 26111700
Voltage : 24 volts