Cart 2 india

Specification
AgeRangeDescription : adult
Brand : DWFSKZKV
Color : One Color
ExternallyAssignedProductIdentifier : 9435679247448
ItemName : DWFSKZKV Controller Dual Power Supply Automatic Awitching Controller HAT310
ItemPackageDimensions_Height : 1 centimeters
ItemPackageDimensions_Length : 3 centimeters
ItemPackageDimensions_Width : 2 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : process-controllers
Manufacturer : DWFSKZKV
Material : Copper
ModelName : DWFSKZKV
ModelNumber : DWFSKZKV
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : DWFSKZKV
ProductDescription : Controller Dual Power Supply Automatic Awitching Controller HAT310
Product Description
Economical ATS Controller
Working power range: AC(160~280)V
Dimensions (mm): 110*77.5*55
Installation size (mm): 65*65.1
Working temperature: (-25~+70)
Weight: 0.2kg
HAT310 dual-power automatic transfer controller is suitable for PC two-stage, CC-level ATS transfer switch (closing signal is continuous output), which can detect the three-phase four-wire voltage of the mains/single-phase voltage of the power generation, and when the mains undervoltage and When there is a phase loss, the ATS switch is controlled after a delay. The controller has the function of sending a signal to start the generator set after the mains power supply is abnormal.

Performance and Features
The HAT310 controller can detect and control the three-phase voltage of mains power/single-phase voltage of power generation and ATS control.
Its main features are as follows:
It has the function of self-injection and self-recovery;
With undervoltage and phase loss detection function;
The LED indicator on the panel can clearly display the working status of the controller;
Two-way N line separation design;
The normal delay of mains power is set by the potentiometer (range 1~60s). The normal delay of power generation is set by the potentiometer (range 1 ~ 60s);
There is no electricity in the mains, and when any phase voltage is lower than the minimum working voltage or a phase is missing, a signal to start the generator set is sent;
The output contact capacity of the mains and power generation switching relay is 16A AC250V, which can be directly used to drive switch conversion, etc.;
The output contact capacity of the generator set starting relay (GENS START) is 16A AC250V, which is a passive normally open/normally closed contact;
It has strong anti-electromagnetic interference capability and is suitable for use in complex environments
ProductSiteLaunchDate : 2024-05-04T01:47:24.583Z
Size : One Size
UnitCount : 1
UnspscCode : 26000000