Cart 2 india

Specification
Brand : Garmin
BulletPoint1 : Quick Edwin C Downlight Led 2W Ip40 Warm Ss Bezel Square
BulletPoint2 : Designed for maximum efficiency
BulletPoint3 : Runs longer
BulletPoint4 : Built to withstand the harsh marine environment
BulletPoint5 : 【After-Sales Service】If you have any questions about the MKP-34 prop and nut kit E, installation and other aspects of the product, you can send us an email at any time, and we will reply within 24 hours.
Color : Black
Department : mens
ExternallyAssignedProductIdentifier1 : 753759217709
ExternallyAssignedProductIdentifier2 : 0753759217709
FitType : Universal Fit
GpsrSafetyAttestation : 1
ImportDesignation : Imported
IncludedComponents : Great Product
ItemName : Garmin Force™ High Efficiency Prop
ItemPackageDimensions_Height : 27.9908 centimeters
ItemPackageDimensions_Length : 10.3886 centimeters
ItemPackageDimensions_Width : 11.5062 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : boat-propellers
Manufacturer : Garmin
Material : Plastic
ModelName : 010-12832-00
ModelNumber : Garmin
NumberOfBoxes : 1
NumberOfItems : 1
PackageLevel : unit
PartNumber : 010-12832-00
Pattern : Solid
ProductDescription : GRONGU MKP-34 prop and nut kit E 1865019 replacement for minn kota shear pin

Package Include
Replacement for minn kota prop include：
2 x 2093101 3/8"-24 Prop Nuts
2 x 2262658 1" x 3/16" Large Shear Pins
2 x 2091701 Washers
(Warm Tips: A crescent or socket wrench are required in order to install or tighten the nuts properly.)

Compatibility
The trolling motor prop nut Compatible with Minn Kota Props: MKP 38 & MKP 33 Weedless Wedge 2 prop(part number 233160/1865018).

Replacement for minn kota trolling motor prop replacement guides:
1. Disconnect the motor from the battery before changing the propeller;
2. Hold the propeller and loosen prop nut with pliers or wrench;
3. Remove prop nut and washer. If drive pin is sheared/broken, you will need to hold the shaft steady with a screwdriver blade pressed into the slot on the end of the shaft;
4. Turn the old prop to horizontal for preventing the drive pin from falling out, and pull it straight off. If drive pin falls out, push it back into the armature shaft;
5. Align new propeller with the drive pin;
6. Install prop washer and prop nut;
7. Tighten prop nut 1/4 turn past snug;
(Be careful: Over tightening prop nut can damage prop and bend the drive pin.)


ProductSiteLaunchDate : 2023-03-24T02:00:58.891Z
RequiredProductComplianceCertificate : California Air Review Board (CARB)
Size : Small
StreetDate : 2020-06-15T00:00:01Z
SupplierDeclaredDgHzRegulation : not_applicable
UnspscCode : 25170000
WarrantyDescription : Warranty