Cart 2 india

Specification
Brand : GRONGU
BulletPoint1 : 【Compatibility】MKP-34 prop and nut kit E compatible with Minn Kota Props: MKP 38 & MKP 33 Weedless Wedge 2 prop(part number 233160/1865018).
BulletPoint2 : 【Superior Material】Prop and nut kit E 1865019 is made from top quality steel, high strength, prevent corrosion and rust, wear and impact resistance, sturdy and durable. High precision and hardness ensure long term reliable service.
BulletPoint3 : 【High Performance】Replacement for minn kota trolling motor part allows you easy to quickly replace/change out your propeller or broken shear pin, correct propeller mounting prevents damage and leakage.
BulletPoint4 : 【Easy Installation】The trolling motor replacement parts are easy to install. First, insert the large shear pin into the hole of the drive rod (note that the length of both ends should be consistent); The groove on the back of the propeller is then horizontally aligned with the clamping pin and placed into the propeller; Then knock in the spiral blades and put in the gasket; Finally, use a crescent or socket wrench (not included) to tighten the prop nut and install finished.
BulletPoint5 : 【After-Sales Service】If you have any questions about the MKP-34 prop and nut kit E, installation and other aspects of the product, you can send us an email at any time, and we will reply within 24 hours.
Color : argent
Department : mens
ExternallyAssignedProductIdentifier1 : 768434959867
ExternallyAssignedProductIdentifier2 : 0768434959867
GpsrSafetyAttestation : 1
ImportDesignation : Imported
IncludedComponents : ‎nut, washers, pins
ItemName : GRONGU Prop Nut Kit E MKP-34 Replacement for Minn Kota Shear Pin Compatible with Minn Kota Trolling Motor MKP-33 MKP-38 Including Prop Nuts & Washers 1865019
ItemPackageDimensions_Height : 12.9 centimeters
ItemPackageDimensions_Length : 0.3 centimeters
ItemPackageDimensions_Width : 7 centimeters
ItemTypeKeyword : boat-propellers
Manufacturer : GRONGU
Material : Aluminum
ModelName : MKP-34 prop and nut kit E
Pattern : Solid
ProductDescription : GRONGU MKP-34 prop and nut kit E 1865019 replacement for minn kota shear pin

Package Include
Replacement for minn kota prop include：
2 x 2093101 3/8"-24 Prop Nuts
2 x 2262658 1" x 3/16" Large Shear Pins
2 x 2091701 Washers
(Warm Tips: A crescent or socket wrench are required in order to install or tighten the nuts properly.)

Compatibility
The trolling motor prop nut Compatible with Minn Kota Props: MKP 38 & MKP 33 Weedless Wedge 2 prop(part number 233160/1865018).

Replacement for minn kota trolling motor prop replacement guides:
1. Disconnect the motor from the battery before changing the propeller;
2. Hold the propeller and loosen prop nut with pliers or wrench;
3. Remove prop nut and washer. If drive pin is sheared/broken, you will need to hold the shaft steady with a screwdriver blade pressed into the slot on the end of the shaft;
4. Turn the old prop to horizontal for preventing the drive pin from falling out, and pull it straight off. If drive pin falls out, push it back into the armature shaft;
5. Align new propeller with the drive pin;
6. Install prop washer and prop nut;
7. Tighten prop nut 1/4 turn past snug;
(Be careful: Over tightening prop nut can damage prop and bend the drive pin.)


ProductSiteLaunchDate : 2023-03-24T02:00:58.891Z
Size : prop nut kit E MKP-34
SupplierDeclaredDgHzRegulation : not_applicable
UnspscCode : 31161700
WarrantyDescription : 1 Year Warranty