Cart 2 india

Specification
Brand : Caplugs
BulletPoint1 : SF SERIES: Manufactured with natural, translucent polyethylene, Caplugs SF Series Caps for Split-Flange Connections are caps that are specifically designed to protect four-bolt split-flange connections. Their clear material allows for the O-ring to remain visible after application
BulletPoint2 : SECURE GRIP: Caplugs SF Series Caps for Split-Flange Connections can be easily installed onto connections and feature an internal bead for a positive locking grip, thereby preventing the entry of dust, dirt and other debris that could potentially affect the performance and integrity of the connection
BulletPoint3 : STANDARD PRESSURE SIZES: For your convenience, the SF Series is available in 10+ standard pressure sizes, capping nominal flange sizes ranging from ½" to 3", as well as capping ferrule sizes up to 4". This specific model fits Ferrule Size 2-1/2"
BulletPoint4 : RESISTANT MATERIAL: Caplugs SF Series Caps for Split-Flange Connections are fabricated from low-density polyethylene (LD-PE), a flexible and durable material that is resistant to water and a wide range of chemicals and weather types. It has a service temperature range of -94° F (-70° C) to 175° F (79° C)
BulletPoint5 : PARTS YOU CAN TRUST: Caplugs prides itself on its extensive line of premium products that are suitable for a plethora of industries, from aviation to medical, general manufacturing and more
Color : Natural
ItemName : Caplugs SF-36 SF Series – Plastic Cap for Split-Flange Connections, 180 Pack, Translucent LD-PE, Ferrule Size 2-1/2" Protective Closures, Dust and Debris Seals, Corrosion Prevention (99191324)
ItemPackageDimensions_Height : 38.862 centimeters
ItemPackageDimensions_Length : 17.018 centimeters
ItemPackageDimensions_Width : 38.1 centimeters
ItemPackageQuantity : 1
ItemShape : Unique to Application
ItemTypeKeyword : pipe-fitting-protective-caps
Manufacturer : Caplugs Inc.
Material : PE-LD
Material1 : Stainless Steel
Material2 : Cast Iron
Material3 : Zinc
MaximumFlowRate : 7 gallons_per_minute
ModelNumber : 99191324
NumberOfItems : 180
PackageLevel : unit
PartNumber : 99191324
ProductDescription :

Specifications:

• Item:-Centrifugal Pump
• HP:-1-1/2
• Phase:-1
• Voltage:-115/230
• Amps:-13.5/6.7
• Housing Material:-Stainless Steel
• Impeller Material:-Stainless Steel
• Wetted Materials:-SS, Viton, Carbon, Ceramic
• Hz:-60
• RPM:-3450
• Inlet:-1-1/2" NPT
• Outlet:-1-1/2" NPT
• Motor Enclosure:-TEFC
• NEMA/IEC Frame:-56J
• Motor Type:-TEFC
• Service Factor:-1.3
• Volute Material:-Stainless Steel
• Shaft Material:-Stainless Steel
• Screw Material:-Stainless Steel
• Seal Type:-Mechanical
• Seal Material:-Viton, Carbon, Ceramic, SS
• Seal Application:-Long Life When Not Run Dry or Pumping Abrasives
• Max. Head:-52 ft.
• Suction Lift:-6 ft.
• Max. GPM @ Head:-100 gpm @ 2 ft.
• Best Efficiency GPM @ Head:-30 gpm @ 43 ft.
• Min. GPM @ Head:-7 gpm @ 50 ft.
• Best Efficiency Range GPM @ Head:-28-73 gpm @ 45-25 ft.
• Max. Liquid Temp.:-200 Degrees F
• Max. Specific Gravity:-1.3
• Max. Case Pressure:-75 psi
• Max. Fluid Viscosity:-100 SSU
• Inlet Pressure:-75 psi
• Impeller Type:-Open
• Bearing Type:-Ball
• Duty:-Continuous
• Max. Dia. Solids:-3/8"
• Port Rotation:-Single
• Drain Plug:-Easily Accessible at Bottom
• UNSPSC:-40151503

ProductSiteLaunchDate : 2017-11-13T08:00:01.000Z
Size : To cap nominal flange size To cap ferrule size 2-1/2"
StreetDate : 2017-11-13T00:00:01Z
Style : Above Ground
UnitCount : 180
UnspscCode : 40000000