Cart 2 india

Specification
Brand : SAMURAI
BulletPoint1 : Replacement Blade Only for Samurai Heavy Duty Non Tapered Curved Hand Saw. Also fits Jameson, Marvin and other brands of saw heads
BulletPoint2 : 13-inch (300mm) blade length, taper ground surface with impulse tooth hardening
BulletPoint3 : 6.5 teeth per inch (7.5 teeth per 30mm) teeth configuration
BulletPoint4 : A well balanced and easy to use saw blade cuts on the pull stroke
BulletPoint5 : The non-tapered set tooth blade offers excellent cutting edge durability through an impulse hardening process which last 3 times longer than conventional teeth
Color : Green
CompatibleMaterial : Wood
CuttingWidth : 0.5 inches
ExternallyAssignedProductIdentifier : 4981049331118
ExternallyAssignedProductIdentifier1 : 4903585102212
ExternallyAssignedProductIdentifier2 : 04903585102212
ExternallyAssignedProductIdentifier3 : 00046561096885
GpsrSafetyAttestation : 1
HandOrientation : Ambidextrous
IncludedComponents : Bare Tool
ItemDisplayDimensions_Length : 18 inches
ItemName : Samurai Heavy Duty 13" (300mm) Non Tapered Curved Replacement Blade Only
ItemPackageDimensions_Height : 0.5 centimeters
ItemPackageDimensions_Length : 41.8 centimeters
ItemPackageDimensions_Width : 7 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : hand-pruning-saws
Language : english
Manufacturer : Samurai
Material : High Carbon Steel
ModelName : Spear & Jackson Kew Gardens Razorsharp Large Folding Pruning Saw
ModelNumber : 4948KEW
NumberOfItems : 1
NumberOfTeeth : 85
PackageLevel : unit
PartNumber : C331LHU
Pattern : single
PowerSourceType : Manual
ProductDescription : This is our most popular pole saw replacement blade fitting both the Jameson, Marvin and other brands of saw heads. In addition this blade is also the replacement blade for the popular C330LH Samurai hand saw. Specifications: Manufacture: Samurai Length: 13" Teeth per inch: 6.35 Hardening: Impluse Mount: Dual Saw Blade Terms: Blade Profile: The two common blade profiles are "tapered" and "non tapered." The tapered blade is thicker at the bottom where the teeth are and thinner at the top following edge. On a tapered blade the teeth do not have "set" (pushed left and right) therefore the blade following the teeth must be thinner to prevent drag in the saw kerf. A non-tapered blade has the same thickness from the top to the bottom. The teeth on a non-tapered blade have "set" to create a wider kerf at the teeth so the remaining blade can follow through the cut without drag. Typically a "non tapered" blade is more rigid than the tapered blade. Tooth Style: The three sided or tri-edge tooth has edges on both sides and across the top of the tooth. This style tooth cuts much faster then the conventional two sided tooth. The advantage of the conventional two sided tooth is it is easier to sharpen. Teeth/inch Teeth per inches refers to the number of saw teeth in one running inch of saw blade. The smaller the number of teeth per inch the "coarser" the blades is. A blade with a higher number of teeth per inch is described as a fine tooth blade. Hardening: Impulse hardening is the most common method for hardening saw teeth. The process involves using electrical impulses to create a very hard layer on the saw tooth edge.
ProductSiteLaunchDate : 2014-08-01T16:07:11.039Z
SpecificationMet : kew
Speed : 480 rpm
StreetDate : 2018-08-01T00:00:01Z
Style : Modern
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
SurfaceRecommendation : Wood
UnitCount : 1
UnspscCode : 27112700
Voltage : 18 volts