Cart 2 india

Specification
Brand : NANOLAP
BulletPoint : New
BulletPoint1 : PREMIUM PRECISION: Premium precision graded aluminum oxide (A/O) in a 4.25 inch x 11 inch lapping / microfinishing film designed to work with the scary sharp system, lapping glass or float glass.
BulletPoint2 : MADE IN THE USA: Waterproof and washable, instead of using a whet stone this finishing film is used to produce a scary sharp finish on blades, tools, chisel, carving tools and fine polish jewelry, gems, watches and glasses.
BulletPoint3 : 3 MIL TEAR-RESISTANT: 3 Mil tear-resistant polyester film backing is less likely to tear or rip than traditional wet or dry sand paper; wide range of uses include lapping, polishing, microfinishing, fining, sanding, honing, buffing, and cleaning.
BulletPoint4 : PRESSURE SENSITIVE ADHESIVE: Pressure sensitive adhesive sandpaper sheets (PSA), easy peel and stick on any surface you want rather than using a traditional whetstone, lapping fluid, leather strop or lapping paste.
BulletPoint5 : 9.0 MICRON SIZE: The ultrafine 9.0 micron (1,800 grit/light blue) lapping film sheet provides one of the middle stage steps for producing ridiculously sharp blades with an impressive mirror-like finish.
BulletPoint6 : Flexibility & Adhesion
Color : Red
CompatibleDevices : Orbital Sander
ConstructionType : Coated
ExternallyAssignedProductIdentifier1 : 816914026322
ExternallyAssignedProductIdentifier2 : 0816914026322
IncludedComponents : 1 x PSA Lapping Film
IndustryStandardIdentifier : M 160447
ItemName : NANOLAP PSA Lapping Film, 3 Pc 9 Micron (1,800 Grit) Adhesive Polishing Paper, 4-1/4” x 11” Microfinishing Fine Sanding Paper, Sanding Film for Scary Sharp Sharpening System, Aluminum Oxide AO
ItemPackageDimensions_Height : 27.94 centimeters
ItemPackageDimensions_Length : 0.7112 centimeters
ItemPackageDimensions_Width : 10.8204 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : psa-discs
Manufacturer : Nanolap Technologies, LLC
Material : Aluminum Oxide
ModelName : NANOLAP 61570N Lapping Film
ModelNumber : 61570N
NumberOfItems : 3
PackageLevel : unit
PartNumber : 61570N
ProductDescription : EKASTORM is designed for sanding of wood and other resinous materials. With a strong and flexible C-Weight paper backing, it is suited for all flat and curved surfaces. A special anti-clogging treatment reduces heat and minimizes loading to produce an optimal finish.
ProductDescription1 : MM Ligno is tailored for wood sanding applications. Fast and even cut thanks to special hourglass abrasive pattern, long service life with good resistance to clogging. Specially developed latex-impregnated paper for flexibility and edgewear resistance. Its dust channels take control of dust, keeping the abrasive grains cutting, and as air circulates under the abrasive it reduces heat during sanding – an important benefit when sanding substrates, avoiding turning wood dust into a clogging putty. Even larger wood dust particles are not an issue thanks to different width dust channels. Exposure to wood dust is a significant occupational health risk, meaning Ultimax Ligno is designed from the start with Mirka’s dust free sanding technology.
ProductDescription2 : Suitable materials Chipboard, Soft / Resinous wood, Mahogany, Solid surface, Ash, Dupont Corian, Teak, Veneer, Samsung Staron, Pine, Melamine, Oak, Hardwood, Birch, Beech, Tungsten carbide
ProductDescription3 : Use for Finishing, Sanding
ProductDescription4 : Pieces per pack x50 pieces - 40/50 Grit x100 pieces - 80,100,120,150,180,220,240,320, 400Grit
ProductSiteLaunchDate : 2025-03-15T06:16:52.805Z
Size : 5pcs 40 Grit
Style : 60 Grit
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 3
UnspscCode : 31191500