Cart 2 india

Specification
Brand : Manicar
BulletPoint1 : Support accessories: This camshaft drive gear torque holding tool is suitable for Detroit diesel 60 series engines
BulletPoint2 : Use function: This tool is used to correctly keep the cam device fixed without damage when removing/installing the cam device fixing bolt; the tool is designed to be installed in the gearbox and meshes with the damping hole on the camshaft drive gear.
BulletPoint3 : Replace the product: it can directly replace the part number J-35652-A.
BulletPoint4 : Excellent design: Use this design to install on the gear box and mesh with the weight reduction hole on the camshaft drive gear.
BulletPoint5 : Rest Assured Shopping: If you have any questions about our products, feel free to contact us at any time. Our sincere service ensures that you have no risks when purchasing on Manicar
CustomerPackageType : Standard Packaging
ExternallyAssignedProductIdentifier1 : 0755318555512
ExternallyAssignedProductIdentifier2 : 755318555512
ExternallyAssignedProductIdentifier3 : 031113149997
ExternallyAssignedProductIdentifier4 : 0080000317582
ExternallyAssignedProductIdentifier5 : 0031113149997
ExternallyAssignedProductIdentifier6 : 0769622703002
ExternallyAssignedProductIdentifier7 : 00769622703002
FitType : Vehicle Specific
ItemDisplayDimensions_Height : 2 inches
ItemDisplayDimensions_Length : 9 inches
ItemDisplayDimensions_Width : 7 inches
ItemDisplayWeight : 1.85 pounds
ItemName : Manicar Cam Gear Retaining Tool J-35652-A Compatible with Detroit Diesel 60 Series Alternative to OEM M30116
ItemPackageDimensions_Height : 12.7 centimeters
ItemPackageDimensions_Length : 2.8956 centimeters
ItemPackageDimensions_Width : 8.89 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : automotive-pulley-tools
Manufacturer : Manicar
ModelNumber : KTI-70300
NumberOfItems : 1
PartNumber : GJ-J-35652-A
ProductDescription :

Product description: suitable for Detroit diesel series 60 engine, cam gear fixing tool J-35652-A instead of OEM M30116

Installation using tools:

1. Insert the shoe seat of the camshaft drive gear torque holding tool J-35652-A into the weight reduction hole of the camshaft drive gear.

2. Use the 3/4-inch square hole in the center of the crankshaft pulley to gently lift the engine so that the bolt holes on the fixing tool are aligned with the bolt holes on the inspection cover on the gearbox cover.

3. Install the camshaft drive gear torque holding tool J-35652-A on the gear box and engage with one of the lightening holes on the camshaft drive gear. Use two access cover bolts to secure the tool to the gearbox cover.

4. Using a 3/4 inch long drive circuit breaker lever and a 27 mm impact sleeve, remove the camshaft drive gear mounting bolts. Discard the bolts.

5. Remove the camshaft drive gear torque fixing tool J-35652-A from the gear box cover.

6. Insert a clean workshop towel into the opening of the gear box to prevent the removed bolts from falling into the gear box.

Note: Do not let bolts or workshop towels fall into the gear box. Failure to remove loose bolts or shop towels from the gearbox may cause serious damage to the gear train when the engine is started.

7. Carefully remove the three (current) or two (previous) camshaft thrust plate mounting bolts to prevent them from falling into the gear box.

Function:

The tool is designed to be installed in the gearbox and mesh with the shock-absorbing hole on the camshaft drive gear.

This tool is used to correctly keep the cam device fixed without damage when removing/installing the cam device fixing bolt.

ProductSiteLaunchDate : 2020-12-23T18:22:04.691Z
SupplierDeclaredDgHzRegulation : not_applicable
UnspscCode : 25170000
WarrantyDescription : Sets & Kits do not have warranty/ see individual p