Cart 2 india

Specification
Brand : maXpeedingrods
BulletPoint : MELLING ENGINE PRODUCTS PT13 TOOL PRIMING
BulletPoint1 : 【Function】The vibration damper holding tool is used to fix the timing chain drive sprockets while installing and removing the vibration damper on 4cyl 1.8L 2.0L 4V TFSI EA888 engines
BulletPoint2 : 【Application】OEM Equivalent Part Number: T10531, Compatible with Audi, compatible with Seat, compatible with Skoda, compatible with Volkswagen 4cyl 1.8L 2.0L 4V TFSI EA888 engines
BulletPoint3 : 【Durable】 Crankshaft pulley removal tools is made of high quality heavy duty steel, high hardness and high strength, not easy to break and deform, the surface is coated with antioxidant layer to prevent rust, extended service life
BulletPoint4 : 【Package Includes】 Assembly of timing fixing bracket (T10351/1), Tightening screw pin (T10351/2), Flip tool (T10351/3), Flange nut (T10351/4), Crankshaft press block (T10368), Support fixing screw *2 （as shown in the picture ）
BulletPoint5 : 【Warranty】maXpeedingrods engine pulley tool are all tested for reliability, durability and performance. We offer 1-year limited warranty, If you have any problem, please let us know
BulletPoint6 : Tips: if you try the 3-jaw puller is not fit you car, you need replace another 3 jaw
Color : Silver, Blue
ExternallyAssignedProductIdentifier1 : 729295115731
ExternallyAssignedProductIdentifier2 : 0729295115731
ExternallyAssignedProductIdentifier3 : 00729295115731
FinishType : Polished
FitType : Vehicle Specific
IncludedComponents : 1 X 3/8 - 24 Screws, 1 X 7/16 - 20 Screws, 1 X Grade 12.9 Washer.
ItemLength : 8.625 inches
ItemName : maXpeedingrods Vibration Damper Holding Tool Crankshaft Pulley Removal Shock Absorber for Audi for Seat for Skoda for VW 1.8 2.0 4V TFSi EA888, Replace T10531
ItemPackageDimensions_Height : 8.5 centimeters
ItemPackageDimensions_Length : 31.5 centimeters
ItemPackageDimensions_Width : 24 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : automotive-pulley-tools
Manufacturer : maXpeedingrods
Material : Stainless Steel
ModelName : Torque Multiplier
ModelNumber : XC8055
NumberOfBoxes : 1
NumberOfItems : 1
NumberOfTeeth : 24
OeManufacturer : Melling
OemEquivalentPartNumber : PT13
OperationMode : Mechanical
PartNumber : HI11CK
PartTypeId : 14827
ProductDescription :

Application

for Audi Seat Skoda VW

Engine Codes (1.8L TFSI):
BZB, CDAA, BPU, BYT, CABA, CABB, CDHA, CDHB, CABD, DAJB, CJSA, CJSB, CJEB, CJEE, CJED, CYGA, CDAC, CJSC, CGYA, DAJA

Engine Codes (2.0L TFSI):
CAWB, CCZA, CBFA, CCTA, CDNB, CDNC CDND, CJXA, CJXE, CJXH, CHHB, CHHA, CULA, CFKA, DEDA, CHJA, CAWA, CCZC, CCZD, CPSA, CJKA, CJKB, CESA, CETA, CFPA, CNCD, CPLA, CYRB, CYRC; CNCE, CYNB, CYPA, CULB, CULC, CNCB, CWZA, CJXF, CJXC, CJHB, CJXB

OE/Part number

T10531

Specification

Material: Steel
Reverse Fixation Tool Size: 30x12cm / 11.81"x4.72"
Reverse Fixation Tool Inside Diameter: 4.7cm / 1.85"
Hole Size: 9mm / 0.35"
Thread Size: M16 x 1.5, 1/4-25 UNF
Condition: Brand new and high quality part
Replacement: Direct replacement
The vibration damper holding tool is used to fix the timing chain drive sprockets while installing and removing the vibration damper on 4cyl 1.8L 2.0L 4V TFSI EA888 engines.

Package included

Assembly of timing fixing bracket (T10351/1)
Tightening screw pin (T10351/2)
Flip tool (T10351/3)
Flange nut (T10351/4)
Crankshaft press block (T10368)
Support fixing screw *2
（as shown in the picture ）

Note

There might be a bit color distortions due to different computer resolutions. There might be a slight errors due to different hand measurement. Please make sure your original part number matches one of the numbers in this listing and compare with the images provided here to ensure fit before purchasing.

ProductSiteLaunchDate : 2024-08-30T21:30:46.394Z
Size : 15.35x11.81x5.12in
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 264
UnspscCode : 25170000
WarrantyDescription : 1 year warranty