Cart 2 india

Specification
Brand : Kommen Tools
BulletPoint : Size: metric M12x1.5mm male thread reducer to 1/8" NPT female thread. Comes with an aluminum crush washer
BulletPoint1 : Durable;compact design (242 x 127 x 204mm);with pedal control. Hose length: 1.8m.
BulletPoint2 : Internal relief valve automatically releases pressure when maximum is exceeded.
BulletPoint3 : Output flow rate (no load): 0 bar: 1.3L/min; 700 bar: 0.24L/min. Air pressure range: 7-11kg/cm².
BulletPoint4 : Usable oil capacity: 1500cc. Includes oil level gauge to monitor oil level.
BulletPoint5 : Ideal for use with HGV Spring Suspension Bush Tool - please see Laser Part No. 7432.
Color : /
CustomerPackageType : Standard Packaging
ExternallyAssignedProductIdentifier : 5018341078621
ExternallyAssignedProductIdentifier1 : 0810022923115
ExternallyAssignedProductIdentifier2 : 810022923115
FitType : Universal
IncludedComponents : /
ItemName : Universal Adjustable Camshaft Pulley Holding Tools
ItemPackageDimensions_Height : 5.98 inches
ItemPackageDimensions_Length : 3 inches
ItemPackageDimensions_Width : 0.99 inches
ItemPackageQuantity : 1
ItemTypeKeyword : automotive-pulley-tools
Manufacturer : Kommen Tools
Material : Aluminum
ModelName : M12x1.5
ModelNumber : M12x1.5
NumberOfBoxes : 1
NumberOfItems : 1
PackageLevel : unit
PartNumber : UNA1081
ProductDescription : For use on all kinds of engines. This wrench is designed with grooved pins, which are designed to hold the camshaft pulley stationary while loosening and tightening the center shaft bolt. While useful on most Asian overhead cam engines, it is most needed on transverse mounted V6 engines, such as the VG30 used in Japanese car Maxima, as well as, the 3VZFE and 1MZFE engines used in Camry. The rear pulleys on these models are in very close proximity to the shock tower making removal and replacement difficult without this locking device. This wrench is designed with small diameter grooved pins to allow access to small hole cam gears. The specially designed pins lock onto the cam gear allowing secure grip when tightening or loosening cam gear bolts. Small diameter pins (10mm) with special groove Pins lock onto cam gear for secure hold Works great on early Japanese car from 1988-1995 Civics and Integras Adjustable distance: 21mm-100mm Changeable Pins: 4 Sets, 4 sizes. Application: Compatible for Benz, Compatible for BMW, Compatible for Ford, Compatible for Mitsubishi, Compatible for Honda, Compatible for VW, Compatible for Audi, Compatible for Nissan, Compatible for VOLVO, Compatible for Toyota.
ProductSiteLaunchDate : 2024-12-23T09:09:45.081Z
Size : 5 × 2cm
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 24101600