Cart 2 india

Specification
Brand : Fafeicy
BulletPoint1 : 【Features】The high voltage module can output high voltage pulse current, small size and high efficiency. The peripheral circuit is simple. Only simply connecting the switch and battery, the discharge is great
BulletPoint2 : 【Wide Use】The high voltage module can be used as high voltage power source in high school science experiment, electronic instrument, anion generator
BulletPoint3 : 【Input Voltage】The input voltage of this high voltage generator module is DC 6V to 12V and will output tens of thousands DC high voltage. Input wires are thin, shorter; output wires are red and thicker, no need to distinguish positive or negative polarity
BulletPoint4 : 【Note】This high voltage generator module is the finished module of transformer for small scientific production. It has high power and inner heat is not easily dissipated, so it can not work for long time
BulletPoint5 : 【Specifications】Size: 70*30*24mm, Input Voltage: 6V-12V DC, Input Current: 0.5A-1A, Input Cable Length: Approx. 26cm, Output Cable Length: Approx. 48cm, Arc Discharge Distance: 1.5cm/0.59" to 2cm/0.78"
Color : Red
CurrentRating : 0.5 amps
ExternallyAssignedProductIdentifier : 3593538839954
ExternallyAssignedProductIdentifier1 : 712190300210
ExternallyAssignedProductIdentifier2 : 0712190300210
InputVoltage : 12 volts
ItemName : DC 12V High Voltage Pulse Generator 60KV Super Arc Ignition Coil Module, for High Voltage Power Source in High School Science Experiment
ItemPackageDimensions_Height : 10.5918 centimeters
ItemPackageDimensions_Length : 2.9972 centimeters
ItemPackageDimensions_Width : 6.5024 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : pulse-generators
Manufacturer : Fafeicy
Material : Plastic
MinimumFrequency : 50 hertz
ModelNumber : Fafeicyaqm0w51crb
OutputVoltage : 12 volts
PartNumber : Fafeicyaqm0w51crb
PowerSourceType : Battery Powered
ProductDescription :

Features:
The module can output high voltage pulse current, small size and high efficiency.
This module is the finished module of transformer for small scientific production.
The input voltage is DC 6V to 12V and will output tens of thousands DC high voltage.
It can be used as high voltage power source in high school science experiment, electronic instrument, anion generator.
The peripheral circuit is simple, simply connect the switch and battery, and the discharge is great.
Input wires are thin, shorter; output wires are red and thicker; no need to distinguish positive or negative polarity.  

Specifications:
Size: 70*30*24mm/2.75*1.18*0.94"
Input Voltage: 6V-12V DC
Input Current: 0.5A-1A
Input Cable Length: Approx. 26cm/10.23"
High Voltage Type: Pulse DC
Output Voltage: About 60KV
Output Current: 0.5A-1A
Output Cable Length: Approx. 48cm/18.89"
Arc Discharge Distance: 1.5cm/0.59" to 2cm/0.78"
Power Supply: Ni-Cd/Ni-mh battery pack, 6V or 12V - battery(12V is better)

Note: 
1, Output ends of cable should be adjusted properly before power on, and the arc distance depends on battery voltage and capacity. 
2,  The arc distance should be from short to long, do not produce a longest arc at first or the module might be damaged easily. 
3, The module has high power and inner heat is not easily dissipated, so it can not work for long time.
4, The way to judge if a battery capacity is enough to output maximum power is to measure the battery voltage when producing arc. It the measured voltage is about 6V, then it can do the trick.

Package Includes:
1 x High Voltage Generator

ProductSiteLaunchDate : 2020-06-17T07:19:43.226Z
SupplierDeclaredDgHzRegulation : not_applicable
UnspscCode : 39121000
Voltage : 12 volts