Specification Brand : Yuecoom BulletPoint1 : Product Description: The module is a high-voltage generator with circuit composed of components and high-voltage transformer, which can be used as a high-voltage source for students' scientific experiments, electronic instruments, negative ion generators and so on. BulletPoint2 : Principle of Use: Super high voltage pulse generator is based on the principle of Teslas coil and outputs high-voltage pulses, which is characterized by small size, high efficiency and high discharge intense. BulletPoint3 : Output in Two Ends: Super arc pulse ignition is divided into input and output. The input side consists of red line and green line, the red line is the positive pole and the green line is the negative pole. The output is two high voltage wires of the same color. Connecting the input terminal to the battery can generate a high-voltage arc. BulletPoint4 : Use with Batteries: High temperature arc igniter module can be used with 3.7V lithium batteries, Ni-Cd/Ni-MH battery packs, 4V or 6V lead-acid batteries and so on. The input voltage and current will affect the output voltage and arc distance. BulletPoint5 : Caution: Arc pulse ignition coil module avoid energizing at high voltage without a load. Before energizing, the distance between the high voltage discharge end should be correctly adjusted, and the arc distance of the output end is proportional to the voltage, capacity and batteries used. InputVoltage1 : 7.4 volts InputVoltage2 : 6 volts ItemName : Yuecoom 1000KV Super High Voltage Pulse Generator, Super Arc Pulse Ignition High Temperature Arc Igniter Module Arc Pulse Ignition Coil Module ItemPackageDimensions_Height : 4 centimeters ItemPackageDimensions_Length : 10 centimeters ItemPackageDimensions_Width : 4 centimeters ItemTypeKeyword : pulse-generators Manufacturer : Yuecoom ModelNumber : Yuecoomvnf297xbi0 PartNumber : Yuecoomvnf297xbi0 ProductDescription : Item Type: High Voltage Pulse Generator Module Model: MC-901 Item Size length 88.5mm / 3.48in, diameter 26mm / 1.02in, section 24mm / 0.94in Input Parameters: 3.7-7.4V/4A Input Wire Length: About 10cm / 3.94in (red positive, green negative) Output Parameters: 800-1000KV/0.5A Output Wire Length: About 16cm / 6.3in