SpecificationBrand : Ongniong
BulletPoint1 : High Efficiency -- The powerful 1.6KW brush DC motor, 3000RPM speed, and 22MPA pressure ensure fast start-up and oil output, which can provide strong power for the hydraulic system and complete lifting operations in a short time.
BulletPoint2 : Safety First -- This 12V DC hydraulic pump comes with a relief valve to avoid over-pressure, and the throttle valve can control fall speed in a certain extent, giving you time to react.
BulletPoint3 : Good Performance -- Our hydraulic power unit is a single-acting pump, which can be used to lift and lower the hydraulic system to effectively handle a lot of work.
BulletPoint4 : Large Capacity -- The fuel tank features a capacity up to 15QT, so you can easily use it without frequent refueling.
BulletPoint5 : Standard Thread: The standard thread of G1/4 is convenient for you to connect most oil pipes (not included).
Color : Black
IncludedComponents : 1*Single Acting Hydraulic Pump
ItemName : 12V DC Hydraulic Pump Single Acting Hydraulic Power Unit 15 Quart Hydraulic Station Pump with Steel Reservoir 1.6kW 3000RPM 22MPA Hydraulic Pump for Dump Trailer Truck Car Lifting
ItemPackageDimensions_Height : 10.83 inches
ItemPackageDimensions_Length : 25.79 inches
ItemPackageDimensions_Width : 12 inches
ItemPackageQuantity : 1
ItemTypeKeyword : hydraulic-pumps
Manufacturer : BOBBINN
Material : Aluminium, Iron, Steel
ModelName : 12V DC Single Acting Hydraulic Pump
ModelNumber : 15 Quart w/Steel Reservoir
NumberOfItems : 1
PartNumber : 12V DC Single Acting Hydraulic Pump
ProductDescription :
Application
It can be used for hydraulic trailers, lifting platforms, stacker trucks, boarding bridges, sanitation trucks, tipper trucks, handling trucks, tractors, forklift trucks, basketball hoops, smoke machines, automobile tailgates, RVs, boat lifts, lift gates, clearance vehicles, car transporters, agricultural equipment, snow ploughs, aerial platform, road signs, material handling, truck tailgate lift, and so on.
Specifications
Material: Aluminium, Iron, Steel
Color: Black
Actions: Single Acting
Installation Method: Horizontal Installation
Voltage: DC12V
Power: 1.6KW
Speed: 3000RPM
Displacement: 1.1ML/0.04OZ/R
Tank Capacity: 14.2L/15QT
Applicable Medium: Hydraulic Oil (Not Included)
Motor Type: Brush DC Motor
Control Mode: Wired Handle(Included)
Pressure: 22 MPA
Noise: Within 75dB
Outlet Thread: G1/4
Handle Cord Length: 4m/13.12ft
Product Size: 57*21.5*24cm/22.44*8.46*9.45in
Package Size: 65.5*30.5*27.5cm/25.79*12*10.83in
Gross Weight: 15.8kg/34.83lbs
Net Weight: 15.64kg/34.48lbs
Package Included
1*Single Acting Hydraulic Pump
Notes
1. Please check the size carefully before ordering.
2. Please note that the suitable hydraulic oil viscosity range is 22-46mm²/s. ATF, OD18, or other clean hydraulic oil with a viscosity of 150-300 SUS at 100.4℉ is acceptable.
3. Please note that the hydraulic oil to be filled into the tank should be filtered and the filter precision should be not less than 25μm.
ProductSiteLaunchDate : 2024-10-08T07:14:27.681Z
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnspscCode : 40151500