Cart 2 india

Specification
Brand : CRYBY
BulletPoint1 : This electric driven hydraulic pump features a double-acting solenoid valve, a manual switch and a foot switch.
BulletPoint2 : If the electric driven hydraulic pump is used in conjunction with other hydraulic tools, it can perform multiple tasks such as lifting, pressing, bending, straightening, cutting, assembling and disassembling. Reduce manual work and increase efficiency.
BulletPoint3 : The electric driven hydraulic pump can be used in various hydraulic equipment, widely used in punching machine, bending machine, jack split hydraulic machine and so on.
BulletPoint4 : The portable electric driven hydraulic pump is controlled by pedal solenoid valve.
BulletPoint5 : This electric driven hydraulic pump has the features of high speed and high quality, stable working and strong storage capacity.
Color : Yellow
ExternallyAssignedProductIdentifier1 : 0759224657421
ExternallyAssignedProductIdentifier2 : 759224657421
IncludedComponents1 : 1 X Electric Driven Hydraulic Pump
IncludedComponents2 : 2 X Oil Hose(1.8M)
IncludedComponents3 : 2 X Quick Connector
ItemName : CRYBY Electric Driven Hydraulic Pump, Double Acting Solenoid Valve Hydraulic Pump with 2 Oil Hose(1.8M) & 2 Quick Connector, Hydraulic Power Unit for Punching Bending Jack Machine, 70Mpa 10000PSI
ItemPackageDimensions_Height : 11.81 inches
ItemPackageDimensions_Length : 19.68 inches
ItemPackageDimensions_Width : 15.35 inches
ItemPackageQuantity : 1
ItemTypeKeyword : hydraulic-pumps
Manufacturer : LOHONG
Material : Buna diaphragms
ModelName : Electric Driven Hydraulic Pump
ModelNumber : Lohong0000453
NumberOfItems : 1
PartNumber : D1064REPAIRKIT
ProductDescription :

Specification:

Input Voltage: AC 110V 60Hz

Flow Rate: 0.6L/Min(＞7Mpa) - 5L/Min(＜7Mpa)

Working Pressure: 290Psi - 10152Psi(2Mpa - 70Mpa)

Oil Capacity: 7L

Motor Power: 750W

Motor Speed: 1400r/Min

G.W: 28.3Kg

N.W.:24.7kg

Product Size:25*32.5*50cm/9.8*12.8*19.7in

Operation Instruction:

1. Open The Filler Before Use, The Electric Pump And Power Connections Before Oiling, Then Press Down The Black Button Which Next To The Motor To Open, Press The Manual Operation Switch (Up), After a Few Air Pressure, Press The Manual Operation Switch (Down), Turn Off The Motor, Connected To Tubing. (The Pressure Should Not Exceed 63Mpa When Air Pressure, In Order To Avoid Damage)

2. Open The Motor After The Pump Connect With The Equipment, And Placed The Operation Valve In Pressurized Position After The Motor Rotates 1-2 Minutes, This Moment The Hydraulic Oil Come Into The Cylinder To Perform The Work, And The Output Of The Hydraulic Oil Will Increases With The Load On Their Own Booster Until 63Mpa.

3. The Oil Pump Regular Working Temperature Between 10℃~50℃,When Find The Oil Temperature≥70 ℃ Should Stop Using After Continuous Working Under High Pressure, Let It Self-Cooling Before Use.

4. The Pressure Of The Relief Valve And Safety Valve Have Been Set Before The Pump Leave The Factory, The User Can Not Arbitrarily Increase The Pressure,Could Only Reduce It According To The Actual Working Pressure, That Can Improve The Life Of The Pump Station.

5. The Motor Must Have Reliable Grounding.

Package Included:

1 X Electric Driven Hydraulic Pump

2 X Oil Hose(1.8M)

2 X Quick Connector

ProductSiteLaunchDate : 2024-05-15T09:38:08.477Z
SupplierDeclaredDgHzRegulation : not_applicable
UnspscCode : 40151500