Cart 2 india

Specification
Brand : Seaforie
BulletPoint1 : OEM PART NUMBER: 31351-76300, 31351-76470, 31351-76305, 31391-76103.
BulletPoint2 : COMPATIBILITY: 31351-76470 hydraulic pump is compatible with Kubota Tractor Series L2250 L2550DT-GST L2650 L2850 L2950 L3450 L3250 L3650.
BulletPoint3 : FEATURES: The hydraulic pump assembly is made of cast iron, with a reinforced structure, high pressure resistance, strong and wear-resistant, and can withstand complex and harsh working environments.
BulletPoint4 : QUALITY: Seaforie hydraulic pump is made in full accordance with OEM standards and can directly replace damaged original parts. 100% inspection before shipment ensures superior performance and long service life.
BulletPoint5 : NOTICE: Please check the OEM number and compatible model carefully before purchase. Please install under the guidance of professionals to avoid product damage due to operating errors.If there are any quality or inCompatible with issues, please send us a message to help you at any time.
ExternallyAssignedProductIdentifier1 : 0713135835644
ExternallyAssignedProductIdentifier2 : 713135835644
FitType : Vehicle Specific
ItemName : Seaforie 31351-76300 Hydraulic Pump Assy Compatible with Kubota Tractor Series L2250 L2550DT-GST L2650 L2850 L2950 L3450 L3250 L3650 31351-76470 31351-76305 31391-76103
ItemPackageDimensions_Height : 1 inches
ItemPackageDimensions_Length : 1 inches
ItemPackageDimensions_Width : 1 inches
ItemPackageQuantity : 1
ItemTypeKeyword : hydraulic-pumps
Manufacturer : Seaforie
Material : iron
NumberOfItems : 1
PartNumber : 31351-76300
ProductDescription :

Specification:
Item Type: Manual Pressure Test Pump
Maximum Testing Pressure: 1000PSI / 7MPa  

Instructions:
1. Install the machine and secure the pump body to the water with four screws.
2. Install the water pipe and connect it to the pump body (Note: seal connection, add washer, you can also use tape, otherwise it is easy to leak)
3. Connect the other end of the outlet hose to the tested pipe
4. Fill the test tube with water, vent the air, and then close the pressure relief valve.
5. Fill the water with water, then rock the handle up and down to start the pressure test.
6. When the pressure gauge rises to the required pressure, the pressure can be stopped (normal tap water pressure is 0.3Mpa, high-rise residential building water pressure is 0.4Mpa, water pipe pressure test is generally pressurized to 0.8-1Mpa, 0.1Mpa is equivalent to 1kg pressure)
7. After stopping the back pressure, if the indicated pressure does not drop, it can be proved that the pressure of the pipe is good. On the contrary, it can be proved that the sealing performance of the sealed tube was not good, and there exists a leakage that has caused a pressure drop.

Package List:
1 x Pump
1 x Handle
1 x Water Pipe
9 x Seal Ring
1 x User Manual

ProductSiteLaunchDate : 2025-01-27T07:48:06.781Z
SupplierDeclaredDgHzRegulation : not_applicable
UnspscCode : 40151500