Cart 2 india

Specification
Brand : yuentoen
BulletPoint : Tandy Leather P217 Craftool� Pear Shader Stamp 6217-00
BulletPoint1 : 【High Quality】This craft tool hole punches is made of white steel, optimized process, it is durable and useful leather craft tool, high-quality white wheel material, non-inferior stainless steel.
BulletPoint2 : 【Meet Your Need】 You will receive the set with four size 1/2/4/6 prong. Prong length is approx 100mm, width is approx 2mm, prong pitch is approx 4mm. Holes are neat and uniform, it is easy to use and sew for you.
BulletPoint3 : 【Humanized Design】Reasonable handle design, it is comfortable to hold. The rhombus tooth is more sharp and durable, it is helpful to get into the leather easily and punch quickly, smooth to pull out, effortless.
BulletPoint4 : 【Integrated Molding】Integrated molding production. High hardness. It is not easy to break teeth. Each product surfaces are coated with a rust preventive oil before shipping, please wipe clean before use.
BulletPoint5 : 【Wide Application】Sharp pins are suitable for leather perforation, convenient and fast, suitable for beginners and professionals, widely used in DIY leather punching, wallets, shoes, handbag, etc.
CareInstructions : Hand Wash Only
Color : White
CustomerPackageType : Standard Packaging
ExternallyAssignedProductIdentifier : 03800234831343
ExternallyAssignedProductIdentifier1 : 0098834621706
ExternallyAssignedProductIdentifier2 : 098834621706
GpsrSafetyAttestation : 1
HoleCount : 2
ItemName : YUENTOEN 4Pcs Leather Craft Tool Hole Punches - Leather Groover Tool, White Steel 4mm 1/2/4/6 Prong Lacing Stitching Chisel Leather Craft Kits for Leathercraft DIY Handwork
ItemPackageDimensions_Height : 13.1 centimeters
ItemPackageDimensions_Length : 1 centimeters
ItemPackageDimensions_Width : 6.1 centimeters
ItemPackageQuantity : 1
ItemShape : Rectangular
ItemTypeKeyword : leathercraft-punching-equipment
Manufacturer : YUENTOEN
Material : Carbon Steel
ModelNumber : Hole Punches-3
NumberOfItems : 1
OperationMode : Manual
PartNumber : LCTHP-01
ProductDescription :
Description:

- High polishing of the blade edge, more sharp and durable.
- Easy to get into the leather, smooth to pull out, effortless.


Feature:
1.Carry on the special technical treatment to the cutting edge that make hardness and toughness better.
2.It is not easy to rust and more wear-resistant.
3.The handle is non-slip that making your operation more smooth.
4.Four sizes 1/2/4/6 prong for choosing:
One-tooth cutting: used for turning or when hole spacing needs to be adjusted.
Double-tooth cutting: used for turning or drilling two holes.
Four-tooth cutting: used for right-angle holes or straight-line drilling.
Six-tooth cutting: for longer straight lines to improve efficiency.


Specifications:
Material: White steel.
Color: Sliver.
Length: approx 100mm / 3.93in.
Prong width: approx 2mm / 0.07in.
Prong pitch: approx 4mm / 0.15in.


Package Included:
4 x Leather tools.


Pay attention to the following points when using:
1.To prevent the leather punch tool from breaking, it must be perpendicular to the epidermis when you punch holes.
2.It is better to put a soft object under the leather to protect the leather punch tool.
3.Rubber hammer or wood hammer is recommended, when using the leather hammer to beat prong, pay attention to the strength of your hands, first light and then heavy.
4.If you find that the steel punch penetrates weakly when drilling holes, you can properly polish it to make the blade sharp.
5.When you no longer use the leather punch tool, apply some oil to his surface and place it in a dry and ventilated place.

ProductSiteLaunchDate : 2022-01-12T09:25:59.104Z
SheetCount : 4
Size : 0.5+1+1.5+2+2.5+3+3.5+4+4.5+5mm (10pcs)
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 44122100